Guarantee All Exams 100% Pass One Time!

2016 NEW Microsoft 70-341: Microsoft
Core Solutions of Microsoft Exchange
Server 2013 Exam Questions and
Answers RELEASED in
Braindump2go.com Online IT Study
Website Today!
2016 Braindump2go Valid Microsoft 70-341
Exam Preparation Materials:
1.| Latest

261Q&As 70-341 Exam Dumps (PDF & VCE):

http://www.braindump2go.com/70-341.html

[Guarantee 100% Exam Pass!]
QUESTION 56
Your company has four regional offices and 20 branch offices.
The regional offices connect to each other by using a 30-Mbps WAN link.
Each branch office connects to its nearest regional office by using a 1-Mbps WAN link.
The network contains an Active Directory forest.
The forest contains a domain controller in each office.
Each office maps to an Active Directory site.
Each branch office site connects to the nearest regional office site by using an Active Directory
site link.
You have an Exchange Server 2013 organization that contains one server in each office.
You need to implement a messaging solution to meet the following requirements:
- The users in the branch offices must only be able to send email
messages that are up to 2 MB to the users in the other offices.
- The users in the regional offices must be prevented from sending
email messages that are larger than 5 MB to the users in any of the
regional offices.
Which cmdlet should you run?
A.
B.
C.
D.

Set-TransportRule
Set-ADSite
Set-AdSiteLink
Set-RoutingGroupConnector

Answer: C

Free Download Braindump2go Latest Microsoft 70-341 Exam PDF
and VCE Dumps

261q from Braindump2go.com.

100% Pass Guaranteed! 100% Real Exam Questions!

braindump2go.com/70-341.html

Guarantee All Exams 100% Pass One Time!
Explanation:
NOT A
Does not relate to message size
Set-TransportRule
Use the Set-TransportRule cmdlet to modify an existing transport rule in your organization. For
information about the parameter sets in the Syntax section below, see Syntax.
EXAMPLE 1
This example modifies the Sales Team Disclaimer transport rule. Modifying the value of one
predicate doesn't affect other predicates used in the rule's conditions or exceptions and doesn't
affect actions on the same rule.
This example sets the FromMemberOf parameter to a value of Sales -Group, which specifies that
the rule is applied if the sender of the message is a member of the Sales- Group distribution
group.
Set-TransportRule "Sales Team Disclaimer" -FromMemberOf "Sales-Group"
NOT B
Does not relate to message size
Set-ADSite
Use the Set-AdSite cmdlet to configure the Exchange settings of Active Directory sites.
EXAMPLE 1
This example configures the Active Directory site named Default -First-Site-Name as a hub site.
Set-AdSite Default-First-Site-Name -HubSiteEnabled $true
NOT D
Does not relate to message size
Set-RoutingGroupConnector
With routing groups and Routing Group connectors you can consolidate communication between
servers by designating bridgehead servers that act as communication points between routing
groups. For example, your organization may have a remote site connected t hrough a wide-areanetwork (WAN) link to your main office. In this example, you can use a Routing Group connector
to route Exchange traffic between a server at your main office and a server at your remote site.
C
The only command that deals with message size.
Set-AdSiteLink
Use the Set-AdSiteLink cmdlet to assign an Exchange-specific cost to an Active Directory IP site
link. You can also use this cmdlet to configure the maximum message size that can pass across
an Active Directory IP site link.
EXAMPLE 1
This example assigns an Exchange-specific cost of 25 to the IP site link
DEFAULT_IP_SITE_LINK and configures a maximum message size limit of 10 MB on the IP site
link.
Set-AdSiteLink DEFAULT_IP_SITE_LINK -ExchangeCost 25 -MaxMessageSize 10MB

Case Study 5: Fabrikam, Inc (QUESTION 57 ~ QUESTION 68)
Overview
Fabrikam, Inc., is a pharmaceutical company located in Europe. The company has 5,000 users.
The company is finalizing plans to deploy an Exchange Server 2013 organization. The company
has offices in Paris and Amsterdam.
Existing Environment
Active Directory Environment
The network contains an Active Directory domain named fabrikam.com.
An Active Directory site exists for each office.
Network Infrastructure

Free Download Braindump2go Latest Microsoft 70-341 Exam PDF
and VCE Dumps

261q from Braindump2go.com.

100% Pass Guaranteed! 100% Real Exam Questions!

braindump2go.com/70-341.html

Guarantee All Exams 100% Pass One Time!
The roles and location of each server are configured as shown in the following table.

Client computers run either Windows 7 or Windows 8 and have Microsoft Office 2010 installed.
The Paris office uses the 192.168.1.0/24 IP range. The Amsterdam office uses the
192.168.2.0/24 IP range. The offices connect to each other by using a high-speed, low-latency
WAN link. Each office has a 10-Mbps connection to the Internet.
Planned Exchange Infrastructure
The company plans to deploy five servers that run Exchange Server.
The servers will be configured as shown in the following table.

Free Download Braindump2go Latest Microsoft 70-341 Exam PDF
and VCE Dumps

261q from Braindump2go.com.

100% Pass Guaranteed! 100% Real Exam Questions!

braindump2go.com/70-341.html

Guarantee All Exams 100% Pass One Time!

The company plans to have mailbox databases replicated in database availability groups (DAGs).
The mailbox databases and DAGs will be configured as shown in the following table.

DAG1 will use FS1 as a file share witness. DAG2 will use FS3 as a file share witness.
You plan to create the following networks on each DAG:
- A dedicated replication network named DAGNET1
- A MAPI network named DAGNET2
All replication traffic will run on DAGNET1. All client connections will run on DAGNET2. Client

Free Download Braindump2go Latest Microsoft 70-341 Exam PDF
and VCE Dumps

261q from Braindump2go.com.

100% Pass Guaranteed! 100% Real Exam Questions!

braindump2go.com/70-341.html

Guarantee All Exams 100% Pass One Time!
connections must never occur on DAGNET1. Replication traffic must only occur on DAGNET2 if
DAGNET1 is unavailable. Each Exchange Server 2013 Mailbox server will be configured to have
two network adapters.
The following two mailbox databases will not be replicated as part of the DAGs:
- A mailbox database named AccountingDB that is hosted on EX1
- A mailbox database named TempStaffDB that is hosted on EX4 EDGE1 will
have an Edge Subscription configured, with both EX1 and EX2 as targets.
Requirements
Planned Changes
An external consultant reviews the Exchange Server 2013 deployment plan and identifies the
following areas of concern:
- The DAGs will not be monitored.
- Multiple Edge Transport servers are required to prevent the potential
for a single point of failure.
Technical Requirements
Fabrikam must meet the following technical requirements:
- Email must be evaluated for SPAM before the email enters the internal
network.
- Production system patching must minimize downtime to achieve the
highest possible service to users.
- Users must be able to use the Exchange Control Panel to autonomously
join and disjoin their department's distribution lists.
- Users must be able to access all Internet-facing Exchange Server
services by using the names of mail.fabrikam.com and
autodiscover.fabrikam.com.
The company establishes a partnership with another company named A. Datum Corporation. A.
Datum uses the SMTP suffix adatum.com for all email address es. Fabrikam plans to exchange
sensitive information with A. Datum and requires that the email messages sent between the two
companies be encrypted. The solution must use Domain Security. Users in the research and
development (R&D) department must be able to view only the mailboxes of the users in their
department from Microsoft Outlook. The users in all of the other departments must be prevented
from viewing the mailboxes of the R&D users from Outlook. Administrators plan to produce HTML
reports that contain information about recent status changes to the mailbox databases. Fabrikam
is evaluating whether to abort its plan to implement an Exchange Server 2010 Edge Transport
server and to implement a Client Access server in the Paris office instead. The Client Access
server will have anti-spam agents installed.
QUESTION 57
Hotspot Question
You need to recommend which configurations must be set for each network.
Which configurations should you recommend? To answer, select the appropriate configurations
for each network in the answer area.

Answer:

Free Download Braindump2go Latest Microsoft 70-341 Exam PDF
and VCE Dumps

261q from Braindump2go.com.

100% Pass Guaranteed! 100% Real Exam Questions!

braindump2go.com/70-341.html

Guarantee All Exams 100% Pass One Time!

QUESTION 58
An administrator recommends removing EDGE1 from the implementation plan and adding a new
Client Access server named CAS-8 instead.
You need to identify which anti-spam feature will NOT be available on CAS-8.
Which anti-spam feature should you identify?
A.
B.
C.
D.

Connection Filtering
Sender Filtering
Content Filtering
Recipient Filtering

Answer: A
Explanation:
EDGE1 is an exchange server 2010
CAS-8 would be an exchange server 2013
Typically, you would enable the anti-spam agents on a mailbox server if your organization doesn't
have an Edge Transport server, or doesn't do any prior anti-spam filtering before accepting
incoming messages.
Connection Filtering agent is only available on the Edge Transport server role. Exchange 2013
does not have an Edge Transport server role yet.
The Connection Filter agent and the Attachment Filter agent are only available on an Edge
Transport server.
Connection Filtering on Edge Transport Servers: Exchange 2013 Help
Anti-spam agents on Legacy Edge Transport servers
If your organization has an Exchange 2007 or Exchange 2010 Edge Transport server installed in
the perimeter network, all of the anti-spam agents that are available on a Mailbox server are
installed and enabled by default on the Edge Transport server. However, the following anti -spam
agents are only available on an Edge Transport server.
Connection Filtering agent Connection filtering inspects the IP address of the remote server that's
trying to send messages to determine what action, if any, to take on an inbound message. The
remote IP address is available to the Connection Filtering agent as a byproduct of the underlying
TCP/IP connection that's required for the SMTP session. Connection filtering uses a variety of IP
Block lists, IP Allow lists, as well as IP Block List provider services or IP Allow List provider
services to determine whether the connection from the specific IP should be blocked or allowed in
the organization. For more information about connection filtering in Exchange
2010, see <fwlink to http://technet.microsoft.com/library/bb124320(v=exchg. 141).aspx>.
Attachment Filter agent Attachment filtering filters messages bas ed on attachment file name, file
name extension, or file MIME content type. You can configure attachment filtering to block a
message and its attachment, to strip the attachment and allow the message to pass through, or to
silently delete the message and its attachment.
For more information about attachment filtering in Exchange 2010,
see <fwlink to http://technet.microsoft.com/library/bb124399(v=exchg.141).aspx>

Free Download Braindump2go Latest Microsoft 70-341 Exam PDF
and VCE Dumps

261q from Braindump2go.com.

100% Pass Guaranteed! 100% Real Exam Questions!

braindump2go.com/70-341.html

Guarantee All Exams 100% Pass One Time!
What's Discontinued in Exchange 2013
http://technet.microsoft.com/en-us/library/jj619283(v=exchg.150).aspx
Feature
Anti-spam agent management in the EMC
In Exchange 2010, when you enabled the anti-spam agents on the Hub Transport server, you
could manage the anti-spam agents in the Exchange Management Console (EMC). In Exchange
2013, when you enable the anti-spam agents in the Transport service on a Mailbox server, you
can't manage the agents in the Exchange admin center (EAC). You can only use the Exchange
Management Shell. For information about how to enable the anti-spam agents on a Mailbox
server, see Enable Anti-Spam Functionality on a Mailbox Server.
Connection Filtering agent on Hub Transport servers
In Exchange 2010, when you enabled the anti-spam agents on a Hub Transport server, the
Attachment Filter agent was the only anti-spam agent that wasn't available. In Exchange 2013,
when you enable the antispam agents in the Transport service on a Mailbox server, the
Attachment Filter agent and the Connection Filtering agent aren't available. The Connection
Filtering agent provides IP Allow List and IP Block List capabilities. For information about how to
enable the anti-spam agents on a Mailbox server, see Enable Anti-Spam Functionality on a
Mailbox Server.
Note:
You can't enable the anti-spam agents on an Exchange 2013 Client Access server. Therefore,
the only way to get the Connection Filtering agent is to install an Exchange 2010 or Exchange
2007 Edge Transport server in the perimeter network. For more information, see Use an Edge
Transport Server in Exchange 2013.
Sender Filter agent
Sender filtering compares the sender on the MAIL FROM: SMTP command to an administratordefined list of senders or sender domains who are prohibited from sending messages to the
organization to determine what action, if any, to take on an inbound message.
Content Filter agent
Content filtering assesses the contents of a message.
Spam quarantine is a feature of the Content Filter agent that reduces the risk of losing legitimate
messages that are incorrectly classified as spam. Spam quarantine provides a temporary storage
location for messages that are identified as spam and that shouldn't be delivered to a user
mailbox inside the organization. For more information, Recipient Filter agent
Recipient filtering compares the message recipients on the RCPT TO: SMTP comm and to an
administrator defined Recipient Block list. If a match is found, the message isn't permitted to enter
the organization.
You can't enable the anti-spam agents on an Exchange 2013 Client Access server. Therefore,
the only way to get the Connection Filtering agent is to install an Exchange 2010 or Exchange
2007 Edge Transport server in the perimeter network Connection Filtering agent is only available
on the Edge Transport server role. Exchange 2013 does not have an Edge Transport server role
yet.
NOT B C D
Only need to identify 1 and this is connection filtering.
QUESTION 59
You need to recommend which task is required to prepare Active Directory for the planned
Exchange Server 2013 implementation.
What should you recommend?
A. On any domain controller in the Paris office, run setup.exe /preparead.
B. On any domain controller in the Amsterdam office, run setup.exe /preparead.

Free Download Braindump2go Latest Microsoft 70-341 Exam PDF
and VCE Dumps

261q from Braindump2go.com.

100% Pass Guaranteed! 100% Real Exam Questions!

braindump2go.com/70-341.html

Guarantee All Exams 100% Pass One Time!
C. On any domain controller in the Paris office, run setup.exe /preparealldomains.
D. On any domain controller in the Amsterdam office, run setup.exe /preparedomain.
Answer: B
Explanation:
B
The schema master is in the Amsterdam office.
Before you install the release to manufacturing (RTM) version of Microsoft Exchange Server 2013
or later cumulative updates (CU) on any servers in your organization, you must prepare Active
Directory and domains.
Run setup.exe /preparead on the schema master.
NOT A C
The schema master is in the Amsterdam office.
Run setup.exe /preparead on the schema master.
NOT D
Fabrikam has a single domain.
In order to prepare a domain, run the following command from an elevated command prompt
after browsing to the Exchange 2013 DVD/ISO.
Setup.exe /PrepareDomain /IAcceptExchangeServerLicenseTerms
If you have a single domain environment, you don't have to prepare the domain as the local
domain is prepared for 2013 as part of preparing the AD. But, if you have a multi-domain
environment, all other domains (except the one on which the AD was prepared) has to be ready
for 2013.
You can prepare all the domains in one go by running the command below.
Setup.exe /PrepareAllDomains /IAcceptExchangeServerLicenseTerms (you will need Enterprise
Admin rights).
QUESTION 60
Drag and Drop Question
You need to recommend to a solution to deploy the Outlook app.
Which three actions should you recommend performing in sequence?

Free Download Braindump2go Latest Microsoft 70-341 Exam PDF
and VCE Dumps

261q from Braindump2go.com.

100% Pass Guaranteed! 100% Real Exam Questions!

braindump2go.com/70-341.html

Guarantee All Exams 100% Pass One Time!
Answer:

Free Download Braindump2go Latest Microsoft 70-341 Exam PDF
and VCE Dumps

261q from Braindump2go.com.

100% Pass Guaranteed! 100% Real Exam Questions!

braindump2go.com/70-341.html

Sign up to vote on this title
UsefulNot useful