Guarantee All Exams 100% Pass One Time!

2016 NEW Microsoft 70-341: Microsoft
Core Solutions of Microsoft Exchange
Server 2013 Exam Questions and
Answers RELEASED in
Braindump2go.com Online IT Study
Website Today!
2016 Braindump2go Valid Microsoft 70-341
Exam Preparation Materials:
1.| Latest

261Q&As 70-341 Exam Dumps (PDF & VCE):

http://www.braindump2go.com/70-341.html

[Guarantee 100% Exam Pass!]
QUESTION 38
You have an Exchange Server 2013 organization that contains two Client Access servers named
SERVER1 and SERVER2 and two Mailbox servers named SERVER3 and SERVER4.
You have a firewall that controls all of the traffic between the internal network and the Internet.
SERVER3 and SERVER4 are prevented from communicating with Internet hosts.
SERVER1 and SERVER3 are in a site named Main.
SERVER2 and SERVER4 are in a site named Main_2.
All outbound email is sent through SERVER1. Main fails.
You discover that email messages for the Internet are queued on SERVER4.
You create a new send connector in Main_2.
You discover that all of the outbound email is queued on SERVER4 and is not delivered to the
Internet.
You verify that the client computers on the network can receive email messages from the Internet
successfully.
You need to ensure that the email messages are delivered successfully to the Internet.
Which cmdlet should you run?
A.
B.
C.
D.

Set-SendConnector
Set-TransportService
Set-ExchangeServer
Set-ADSite

Answer: A
Explanation:

Free Download Braindump2go Latest Microsoft 70-341 Exam PDF
and VCE Dumps

261q from Braindump2go.com.

100% Pass Guaranteed! 100% Real Exam Questions!

braindump2go.com/70-341.html

Guarantee All Exams 100% Pass One Time!
Mailbox Server
In an Exchange Server 2013 organization the Mailbox server role is responsible for sending
outbound email via a Send Connector.

When this option is enabled outbound email that is being sent via a Send Connector does not go
directly out from the Mailbox server, and instead is proxied through a Client Access server in the
site. There is nothing complicated going on here, the Client Access server simply acts as a proxy
for the connection so that the receiving host out on the internet sees the connection as coming from
the Client Access server name and IP address rather than the Mailbox server.
IN THIS QUESTION THE CLIENT ACCESS SERVER (SERVER1) IS ACTING AS A PROXY
SERVER FOR THE MAILBOX SERVERS.
NEED TO CHANGE THE SEND CONNECTOR SETTINGS IN ORDER FOR MAIL TO FLOW OUT
FROM SERVER4 TO THE INTERNET.
Correct Answer A
Set-SendConnector
Use the Set-SendConnector cmdlet to modify a Send connector.
EXAMPLE 1
This example makes the following configuration changes to the Send connector named
Contoso.com Send
Connector:
Sets the maximum message size limit to 10 MB.
Changes the connection inactivity time-out to 15 minutes.
Set-SendConnector "Contoso.com Send Connector" -MaxMessageSize 10MB –
ConnectionInactivityTimeOut
00:15:00
Send Connector
In Microsoft Exchange Server 2013, a Send connector controls the flow of outbound messages to
the receiving server.
They are configured on Mailbox servers running the Transport service. Most commonly, you

Free Download Braindump2go Latest Microsoft 70-341 Exam PDF
and VCE Dumps

261q from Braindump2go.com.

100% Pass Guaranteed! 100% Real Exam Questions!

braindump2go.com/70-341.html

Guarantee All Exams 100% Pass One Time!
configure a Send connector to send outbound email messages to a smart host or directly to their
recipient, using DNS.
Exchange 2013 Mailbox servers running the Transport service require S end connectors to deliver
messages to the next hop on the way to their destination.
Send connectors that are created on Mailbox servers are stored in Active Directory and are
available to all Mailbox servers running the Transport service in the organization.

Free Download Braindump2go Latest Microsoft 70-341 Exam PDF
and VCE Dumps

261q from Braindump2go.com.

100% Pass Guaranteed! 100% Real Exam Questions!

braindump2go.com/70-341.html

Guarantee All Exams 100% Pass One Time!

NOT B
Set-transportservice
Use the Set-TransportService cmdlet to set the transport configuration options for the Transport
service on Mailbox servers or for Edge Transport servers. This example sets the
TransientFailureRetryCount parameter to 3 and sets the TransientFailureRet ryInterval paramet er
to 30 seconds for the Transport service on a Mailbox server named Mailbox01.
Set-TransportServic e Mailbox01 -TransientFailureRetry Count 3 -TransientFailureRetryInterval
00:00:30
NOT C
Will not resolve the issue
Set-ExchangeServer
Use the Set-ExchangeServer cmdlet to set Exchange attributes in Active Directory for a specified
server.

Free Download Braindump2go Latest Microsoft 70-341 Exam PDF
and VCE Dumps

261q from Braindump2go.com.

100% Pass Guaranteed! 100% Real Exam Questions!

braindump2go.com/70-341.html

Guarantee All Exams 100% Pass One Time!
For information about the parameter sets in the Syntax section below, see Syntax.
EXAMPLE 1
This example disables error reporting on the specified server.
Set-ExchangeServer -Identity TestServer.Contoso.com -ErrorReportingEnabled: $false
NOT D
Will not resolve the issue
Set-ADSite
Use the Set-AdSite cmdlet to configure the Exchange settings of Active Directory s ites.
EXAMPLE 1
This example configures the Active Directory site named Default -First-Site-Name as a hub site.
Set-AdSite Default-First-Site-Name -HubSiteEnabled $true
http://technet.microsoft.com/en-us/library/aa998294(v=exchg.150).aspx
QUESTION 39
You have an Exchange Server 2013 organization named adatum.com.
The organization contains five Mailbox servers and two Client Access servers.
You need to ensure that an administrator named user1 receives a daily email message that
contains a log of all the Exchange Server administrative actions.
Which cmdlet should you use in a scheduled task?
A.
B.
C.
D.
E.

Search-AdminAuditLog
Set-Mailbox
New-AdminAuditLogSearch
Set-ExchangeServer
Set-AdminAuditLogConfig

Answer: C
Explanation:
NOT A
Use Search-AdminAuditLog for searching through the audit logs.
Search-AdminAuditLog
Use the Search-AdminAuditLog cmdlet to search the contents of the administrator audit log.
For information about the parameter sets in the Syntax section below, see Syntax.
EXAMPLE 1
This example finds all the administrator audit log entries that contain either the New-RoleGroup or
the New-ManagementRoleAssignment cmdlet. Search-AdminAuditLog -Cmdlets New-RoleGroup,
New-Management RoleAssignment
NOT B
Set-Mailbox
Use the Set-Mailbox cmdlet to modify the settings of an existing mailbox. You can use this cmdlet
for one mailbox at a time.
To perform bulk management, you can pipeline the output of various Get-cmdlets (for example,
the Get-Mailbox or Get-User cmdlets) and configure several mailboxes in a single-line command.
You can also use the Set-Mailbox cmdlet in scripts.
For information about the parameter sets in the Syntax section below, see Syntax.
EXAMPLE 1
This example delivers John Woods's email messages to John's mailbox and also forwards them
to Manuel Oliveira's (manuel@contoso.com) mailbox.
Set-Mailbox -Identity John -DeliverToMailboxAndForward $true -ForwardingSMTPAddress
manuel@contoso.com

Free Download Braindump2go Latest Microsoft 70-341 Exam PDF
and VCE Dumps

261q from Braindump2go.com.

100% Pass Guaranteed! 100% Real Exam Questions!

braindump2go.com/70-341.html

Guarantee All Exams 100% Pass One Time!
NOT D
Set-ExchangeServer
Use the Set-ExchangeServer cmdlet to set Exchange attributes in Active Directory for a specified
server.
For information about the parameter sets in the Syntax section below, see Syntax.
EXAMPLE 1
This example disables error reporting on the specified server.
Set-ExchangeServer -Identity TestServer.Contoso.com -ErrorReportingEnabled: $false
NOT E
NOT Set-AdminAuditLogConfig
Use the Set-AdminAuditLogConfig cmdlet to configure the administrator audit logging
configuration settings.
EXAMPLE 1
This example enables administrator audit logging for every cmdlet and every parameter in the
organization, with the exception of Get cmdlets.
Set-AdminAuditLogConfig -AdminAuditLogEnabled $true -AdminAuditLogCmdlets * AdminAuditLogParameters *
C
New-AdminAuditLogSearch
Use the New-AdminAuditLogSearc h cmdlet to search the contents of the administrator audit log
and send the results to one or more mailboxes that you specify.
For information about the parameter sets in the Syntax section below, see Syntax.
EXAMPLE 1
This example finds all the administrator audit log entries that match the following criteria and
sends the results to the david@contoso.com and chris@contoso.com SMTP addresses:
Cmdlets Set-Mailbox Parameters UseDatabaseQuotaDefaults, ProhibitSendReceiveQuota,
ProhibitSendQuota StartDate 01/24/2012 EndDate 02/12/2012
New-AdminAuditLogSearch -Name "Mailbox Quota Change Audit" -Cmdlets Set-Mailbox Parameters
UseDatabaseQuotaDefaults, ProhibitSendReceiveQuota, ProhibitSendQuota -StartDate
01/24/2012 -EndDate
02/12/2012 -StatusMailRecipients david@contoso.com, chris@contoso.com NewAdminAuditLogSearch: Exchange 2013 Help
QUESTION 40
You have an Exchange Server 2013 organization.
You plan to deploy Exchange ActiveSync for mobile devices.
Each mobile device will be authenticated by using certificates issued by an internal certification
authority (CA).
You need to configure the organization to authenticate the mobile devices by using the
certificates.
Which two actions should you perform? (Each correct answer presents part of the solution.
Choose two.)
A. From Internet Information Services (IIS) Manager on each Client Access server, configure
the Microsoft-Server-ActiveSync virtual directory to require client certificates.
B. From Exchange Admin Center, configure the Microsoft-Server-ActiveSync virtual directory
to require client certificates.
C. From Internet Information Services (IIS) Manager on each Client Access server, enable
Active Directory Client Certificate Authentication.
D. From Internet Information Services (IIS) Manager on each Mailbox server, enable Active

Free Download Braindump2go Latest Microsoft 70-341 Exam PDF
and VCE Dumps

261q from Braindump2go.com.

100% Pass Guaranteed! 100% Real Exam Questions!

braindump2go.com/70-341.html

Guarantee All Exams 100% Pass One Time!
Directory Client Certificate Authentication.
Answer: BC
Explanation:
NOT A
Enable Active Directory Client Certificate Authentication within IIS but configure the MicrosoftServer-ActiveSync virtual directory to require client certificates is performed in Exchange Admin
Center
NOT D
IIS is configured on the Client Access Server not the Mailbox Server
B
After you've installed the Exchange 2013 Client Access server, there are a variety of configuration
tasks that you can perform.
Although the Client Access server in Exchange 2013 doesn't handle processing for the client
protocols, several settings need to be applied to the Client Access server, including virtual
directory settings and certificate settings.
http://technet.microsoft.com/en-us/library/gg247612(v=exchg.150).aspx
Exchange Server 2013 automatically configures multiple Internet Information Services (IIS) virtual
directories during installation.
This topic contains information about the default IIS authentication settings and default Secure
Sockets Layer (SSL) settings for the Client Access and Mailbox servers.
The following table lists the default settings on a stand-alone Exchange 2013 Client Access
server.
Default Client Access server IIS authentication and SSL settings
Virtual directory Authentication method SSL settings
Management method
Microsoft-Server-ActiveSync Basic authentication SSL required Requires 128-bit encryption
EAC or Shell

Free Download Braindump2go Latest Microsoft 70-341 Exam PDF
and VCE Dumps

261q from Braindump2go.com.

100% Pass Guaranteed! 100% Real Exam Questions!

braindump2go.com/70-341.html

Guarantee All Exams 100% Pass One Time!

C
Configure certificate-based authentication for Exchange ActiveSync
http://blogs.technet.com/b/exchange/archive/2012/ 11/28/configure-certificat e-basedauthentication-forexchangeactivesync.aspx
Client Access Server Configuration
To configure the Client Access server to enforce certificate based authentication :
1. Verify if Certificate Mapping Authentication is installed on the server. Right click on Computer in
the start menu and choose Manage.
Expand Roles and click on Web Server (IIS)
Scroll down to the Role Services section. Under the Security section you should see Client
Certificate Mapping
Authentication installed.

Free Download Braindump2go Latest Microsoft 70-341 Exam PDF
and VCE Dumps

261q from Braindump2go.com.

100% Pass Guaranteed! 100% Real Exam Questions!

braindump2go.com/70-341.html

Guarantee All Exams 100% Pass One Time!

If you don't see Client Certificate Mapping Authentication installed, click add Role Services
> (scroll) Security and select Client Certificate Mapping Authentication and then click Install.
Reboot your server.

Free Download Braindump2go Latest Microsoft 70-341 Exam PDF
and VCE Dumps

261q from Braindump2go.com.

100% Pass Guaranteed! 100% Real Exam Questions!

braindump2go.com/70-341.html

Guarantee All Exams 100% Pass One Time!

QUESTION 41
You have an Exchange Server 2013 organization that contains two servers named EX1 and EX2.
EX1 and EX2 are the members of a database availability group (DAG) named DAG1.
EX1 and EX2 each contain a copy of a mailbox database named DB1.
DB1 is configured to retain deleted items for 120 days.
At the end of each month, the mailbox databases on EX1 are backed up to tape.
The monthly backups are retained for two years.
A user named User1 has a mailbox in DB1.
User1 discovers that a mailbox folder that contained important email messages was deleted more
than six months ago.
You need to recover the deleted mailbox folder without affecting any other users who have
mailboxes in DB1.

Free Download Braindump2go Latest Microsoft 70-341 Exam PDF
and VCE Dumps

261q from Braindump2go.com.

100% Pass Guaranteed! 100% Real Exam Questions!

braindump2go.com/70-341.html

Guarantee All Exams 100% Pass One Time!
Which three actions should you perform? (Each correct answer presents part of the solution.
Choose three.)
A.
B.
C.
D.
E.

Run the New-MaiboxRestoreRequestcmdlet.
Run the New-MailboxDatabasecmdlet and specify the Recovery parameter.
Restore DB1 from the tape backup to an alternate location.
Restore DB1 from the tape backup to the database's original location.
Run the New-Mailbox cmdlet and specify the Recovery parameter.

Answer: ABC
Explanation:
Recovery Database
A recovery database is a special kind of mailbox database that allows you to mount a restored
mailbox database and extract data from the restored database as part of a recovery operation.
You can use the New-MailboxRestoreRequest cmdlet to extract data from a recovery database.
After extraction, the data can be exported to a folder or merged into an existing mailbox.
Recovery databases enable you to recover data from a backup or copy of a database without
disturbing user access to current data.
A
New-MaiboxRestoreRequestcmdlet
Use the New-MailboxRestoreRequest cmdlet to restore a soft-deleted or disconnected mailbox.
This cmdlet starts the process of moving content from the soft-deleted mailbox, disabled mailbox,
or any mailbox in a recovery database into a connected primary or archive mailbox.
For information about the parameter sets in the Syntax section below, see Syntax.
EXAMPLE 1
To create a restore request, you must provide the DisplayName, LegacyDN, or MailboxGUID for
the softdeleted or disabled mailbox. This example uses the Get-MailboxStatistics cmdlet to return
the DisplayName, LegacyDN, MailboxGUID, and DisconnectReason for all mailboxes on mailbox
database MBD01 that have a disconnect reason of SoftDeleted or Disabled.
Get-MailboxStatistics -Database MBD01 | Where { $_.DisconnectReason -eq "SoftDeleted" -or
$_.
DisconnectReason -eq "Disabled" } | Format-List LegacyDN, DisplayName, MailboxGUID,
DisconnectReason
This example restores the source mailbox with the MailboxGUID 1d20855f-fd54-4681-98e6e249f7326ddd on mailbox database MBD01 to the target mailbox with the alias Ayla. NewMailboxRestoreRequest -SourceDatabase "MBD01" -SourceStoreMailbox 1d20855f-fd54-468198e6-e249f7326ddd -TargetMailbox Ayla
B
Use the New-MailboxDatabase cmdlet to create a mailbox database object in the database
container in Active Directory.
For information about the parameter sets in the Syntax section below, see Syntax.
EXAMPLE 1
This example creates the mailbox database MailboxDatabase01. This example also specifies
where to create the .edb database file, which is different than the default location.
New-MailboxDatabase -Name "MailboxDatabase01" -EdbFilePath
D:\DatabaseFiles\MailboxDatabase01.edb
The Recovery parameter specifies that the new database is designated as a recovery database.
NOT D
Need to recover data from a backup or copy of a database without disturbing user access to
current data.

Free Download Braindump2go Latest Microsoft 70-341 Exam PDF
and VCE Dumps

261q from Braindump2go.com.

100% Pass Guaranteed! 100% Real Exam Questions!

braindump2go.com/70-341.html

Guarantee All Exams 100% Pass One Time!
Therefore restore to an alternate location.
NOT E
No recovery parameter exists for the New-Mailbox cmdlet.
Reference: Create a Recovery Database
Reference: Restore Data Using a Recovery Database
QUESTION 42
You have an Exchange Server 2010 organization.
All users connect to their mailbox by using Microsoft Outlook 2013 and Outlook Web App.
All client connections to Exchange Server use the name mail.contoso.com.
You deploy Exchange Server 2013 to the organization, you move all of the users to Exchange
Server 2013, and then you decommission all of the Exchange Server 2010 servers.
The users report that when they open Outlook 2013, they receive a certificate warning message.
The users do not receive a certificate error message or a certificate warning message when they
open Outlook Web App.
You need to prevent the certificate warning message from occurring when the users open
Outlook 2013.
Which cmdlet should you run?
A.
B.
C.
D.

Set-ClientAccessServer
New-ExchangeCertficiat e
New-ClientAccessArray
Import-ExchangeCertific ate

Answer: A
Explanation:
UNABLE TO ASSOCIATE SET-CLIENTA CCESSSERVE R WITH CERTIFICA TE ERROR D
LOOKS LIKE A BETTER RESPONSE.
IMPORT THE SSL CERTIFICATE AND THEN ASSIGN IT TO OUTLOOK 2013
Self-signed Certificate
When you install Exchange 2013, a self-signed certificate is automatically configured on the
Mailbox servers. A self-signed certificate is signed by the application that created it. The subject
and the name of the certificate match. The issuer and the subject are defined on the certificate.
This self-signed certificate is used to encrypt communications between the Client Access server
and the Mailbox server. The Client Access server trusts the self-signed certificate on the Mailbox
server automatically, so no third-party certificate is needed on the Mailbox server. When you
install Exchange 2013, a self-signed certificate is also created on the Client Access server.
This self-signed certificate will allow some client protocols to use SSL for their communications.
Exchange ActiveSync and Outlook Web App can establish an SSL connection by using a selfsigned certificate.
Outlook Anywhere won't work with a self-signed certificate on the Client Access server. Selfsigned certificates must be manually copied to the trusted root certificate store on the client
computer or mobile device. When a client connects to a server over SSL and the server presents
a self-signed certificate, the client will be prompted to verify that the certificate was issued by a
trusted authority. The client must explicitly trust the issuing authority. If the client confirms the
trust, then SSL communications can continue.
Note:
By default, the digital certificate installed on the Mailbox server or servers is a self-signed
certificate. You don't need to replace the self-signed certificate on the Mailbox servers in your
organization with a trusted third-party certificate. The Client Access server automatically trusts the
self-signed certificate on the Mailbox server and no other configuration is needed for certificates

Free Download Braindump2go Latest Microsoft 70-341 Exam PDF
and VCE Dumps

261q from Braindump2go.com.

100% Pass Guaranteed! 100% Real Exam Questions!

braindump2go.com/70-341.html

Guarantee All Exams 100% Pass One Time!
on the Mailbox server.
Outlook 2013
When connecting to an Exchange server using Outlook 2013 you may encounter an SSL trust
error.

Free Download Braindump2go Latest Microsoft 70-341 Exam PDF
and VCE Dumps

261q from Braindump2go.com.

100% Pass Guaranteed! 100% Real Exam Questions!

braindump2go.com/70-341.html

Guarantee All Exams 100% Pass One Time!

This error occurs when the Exchange server is configured with a self-signed SSL certificate.
Outlook makes connections to the Exchange server over HTTPS and therefore must trust the
SSL certificate that is configured on the server, otherwise it will display those error messages to

Free Download Braindump2go Latest Microsoft 70-341 Exam PDF
and VCE Dumps

261q from Braindump2go.com.

100% Pass Guaranteed! 100% Real Exam Questions!

braindump2go.com/70-341.html

Guarantee All Exams 100% Pass One Time!
the end user.
To resolve the issue install a valid SSL certificate on the Exchange server from a trusted
certificate authority.
See Exchange Server 2013 SSL certificates for more details on this as well as step by step
instructions.
A
Set-ClientAccessServer
Use the Set-ClientAccessServer cmdlet to set properties on specified Client Access server
objects.
For information about the parameter sets in the Syntax section below, see Syntax.
EXAMPLE 1
This example sets two properties on the Client Access server CAS -01.
Set-ClientAccessServer -Identity "CAS-01" -AutoDiscoverServiceInternalUri
"https://cas01.contoso.com/autodiscover/autodiscover.xml" -AutoDiscoverSiteScope "Mail"
EXAMPLE 2
This example sets two properties on the Client Access server CASMail.
Set-ClientAccessServer -Identity "CASMail" -AutoDiscoverServiceInternalUri
"https://casmail.contoso.com/autodiscover/autodiscover.xml" -AutoDiscoverSiteScope "Mail"
NOT B
New-ExchangeCertficiat e
Not an Exchange 2013 command or any other Exchange version command
NOT C
Exchange 2010 command
Use the New-ClientAccessArray cmdlet to create an object that represents a load balanced array
of Client Access servers within a single Active Directory site.
EXAMPLE 1
This example creates the Client Access server array server.contoso.com.
New-ClientAccessArray -Fqdn server.contoso.com -Site "Redmond" -Name
"server.contoso.com"
NOT D
Exchange 2013 command
Use the Import-ExchangeCertificate cmdlet to import a certificate or chain of certificates. For
information about the parameter sets in the Syntax section below, see Syntax.
EXAMPLE 1
This example imports an existing certificate and private key from the PKCS #12 file
ExportedCert.pfx.
Import-ExchangeCertific ate -FileData ([Byte[]]$(Get-Content -Path
c:\certificates\ExportedCert.pfx -Encoding
byte -ReadCount 0)) -Password:(Get-Credential).password
QUESTION 43
Your network contains an Active Directory forest.
The forest contains two sites named Montreal and New York.
You have an Exchange Server 2013 organization that contains a Mailbox server and a Client
Access server in each site.
The users in the New York site report that the offline address book (OAB) is not updated after an
extended WAN outage between the sites.
The Montreal site contains the OAB generation server.
You need to ensure that the New York site users download the OAB from a server in the New
York site.
Which two cmdlets should you run? (Each correct answer presents part of the solution. Choose

Free Download Braindump2go Latest Microsoft 70-341 Exam PDF
and VCE Dumps

261q from Braindump2go.com.

100% Pass Guaranteed! 100% Real Exam Questions!

braindump2go.com/70-341.html

Guarantee All Exams 100% Pass One Time!
two.)
A.
B.
C.
D.
E.

Set-Mailbox
New-OfflineAddressBook
New-Mailbox
New-OabVirtualDirectory
Set-OfflineAddressBook

Answer: AC
Explanation:
A
Set-Mailbox
Use the Set-Mailbox cmdlet to modify the settings of an existing mailbox.
You can use this cmdlet for one mailbox at a time.
To perform bulk management, you can pipeline the output of various Get-cmdlets (for example,
the Get-Mailbox or Get-User cmdlets) and configure several mailboxes in a single-line command.
You can also use the Set-Mailbox cmdlet in scripts.
For information about the parameter sets in the Syntax section below, see Syntax.
Step2: Enable OABGen capability
Set-Mailbox -Arbitration oabs -OABGen $true
http://technet.microsoft.com/en-us/library/aa996345(v=exchg.150).aspx
Provision Recipients for Offline Address Book Downloads
To specify which OAB is downloaded by linking the OAB directly to a recipient's mailbox, use the
following syntax.
Set-Mailbox -Identity <MailboxIDParameter> -OfflineAddressBook
<OfflineAddressBookIdParameter>
Better for this question (but the option is not covered:)
Use the Shell to specify the OAB that multiple recipients will download
This example specifies that all user mailboxes in the United States for Contoso will download the
OAB Contoso United States.
Get-User -ResultSize Unlimited -Filter { Company -eq "Contoso" -and RecipientType -eq
"UserMailbox" } | Where { $_.CountryOrRegion -eq "United States"} | Set-Mailbox OfflineAddressBook "Contoso United States"
NOT B
New-OfflineAddressBook
Use the New-OfflineAddressBook cmdlet to create an offline address book (OAB).
EXAMPLE 1
This example uses two commands to create the OAB named OAB_AgencyB that includes all
address lists where AgencyB is part of the name. With the settings shown, an OAB is generated
by myserver.contoso.com on Mondays and Wednesdays from 01:00 (1:00 A.M.) to 02:00 (2:00
A.M.). The command also creates the default OAB for the organization.
$a = Get-AddressList | Where {$_.Name -Like "*AgencyB*"
New-OfflineAddressBook -Name "OAB_AgencyB" -Server myserver.contoso.com -AddressLists
$a -Schedule "Mon.01:00-Mon.02:00, Wed.01:00-Wed.02:00"
C
New-Mailbox
Use the New-Mailbox cmdlet to create a user in Active Directory and mailbox-enable this new
user.
Step1: Create a new arbitration mailbox
New-Mailbox -Arbitration -Name "OAB New York" -Database DB2NewYork -UserPrincipalName

Free Download Braindump2go Latest Microsoft 70-341 Exam PDF
and VCE Dumps

261q from Braindump2go.com.

100% Pass Guaranteed! 100% Real Exam Questions!

braindump2go.com/70-341.html

Guarantee All Exams 100% Pass One Time!
oabs@contoso.com –DisplayName “OAB Mailbox for New York”
EXAMPLE 1
This example creates a user Chris Ashton in Active Directory and creates a mailbox for the user.
The mailbox is located on Mailbox Database 1. The password must be reset at the next logon. To
set the initial value of the password, this example creates a variable ($pass word), prompts you to
enter a password, and assigns that password to the variable as a SecureString object.
$password = Read-Host "Enter password" -AsSecureString
New-Mailbox -UserPrincipalName chris@contoso.com -Alias chris -Database "Mailbox Database
1" -Name ChrisAshton -OrganizationalUnit Users -Password $password -FirstName Chris LastName Ashton -DisplayName "Chris Ashton" -ResetPasswordOnNextLogon $true
NOT D
New-OabVirtualDirectory
Use the New-OABVirtualDirectory cmdlet to configure a server as a web distribution point for an
offline address book (OAB).
EXAMPLE 1
This example creates an OAB virtual directory on CASServer01 and configures the distribution
service to poll the generation server every two hours.
New-OABVirtualDirectory -Server CASServer01 -PollInterval 120
NOT E
Set-OfflineAddressBook
Use the Set-OfflineAddressBook cmdlet to modify offline address book (OAB) settings.
EXAMPLE 1
This example changes the name of the OAB.
Set-OfflineAddressBook -Identity "\Default Offline Address Book" -Name "My Offline Address
Book"

Free Download Braindump2go Latest Microsoft 70-341 Exam PDF
and VCE Dumps

261q from Braindump2go.com.

100% Pass Guaranteed! 100% Real Exam Questions!

braindump2go.com/70-341.html

Sign up to vote on this title
UsefulNot useful