Guarantee All Exams 100% Pass One Time!

2016 NEW Microsoft 70-341: Microsoft
Core Solutions of Microsoft Exchange
Server 2013 Exam Questions and
Answers RELEASED in
Braindump2go.com Online IT Study
Website Today!
2016 Braindump2go Valid Microsoft 70-341
Exam Preparation Materials:
1.| Latest

261Q&As 70-341 Exam Dumps (PDF & VCE):

http://www.braindump2go.com/70-341.html

[Guarantee 100% Exam Pass!]
QUESTION 50
You have an Exchange Server 2013 organization that is configured to filter email messages for
spam and malware.
You need to modify the schedule for applying updates to the anti-spam and the antimalware
definitions.
Which command should you run?
A.
B.
C.
D.

Update-MalwareFilteringS erver.ps1
Set-MalwareFilteringServer
Set-SenderFilterConfig
Update-SafeList

Answer: B
Explanation:
NOT A
Microsoft Exchange Server 2013 administrators can manually download anti-malware engine and
definition (signature) updates.
Update-MalwareFilteringS erver.ps1 used in manual updates not schedule updates.
NOT C
Not used for spam and malware updates.
Use the Set-SenderFilterConfig cmdlet to modify the Sender Filter agent configuration.
EXAMPLE 1
This example makes the following modifications to the Sender Filter agent configuration:
It enables blocking of blank senders.

Free Download Braindump2go Latest Microsoft 70-341 Exam PDF
and VCE Dumps

261q from Braindump2go.com.

100% Pass Guaranteed! 100% Real Exam Questions!

braindump2go.com/70-341.html

Guarantee All Exams 100% Pass One Time!
It blocks messages from lucernepublishing.com and all subdomains. It adds user1@contoso.com
and user2@contoso.com to the blocked senders list without affecting any existing entries.
Set-SenderFilterConfig -BlankSenderBlockingEnabled $true –
BlockedDomainsAndSubdomains
lucernepublishing.com -BlockedSenders
@{Add="user1@contoso.com","user2@cont oso.com"}
NOT D
Use the Update-SafeList cmdlet to update the safelist aggregation data in Active Directory.
Safelist aggregation data is used in the built-in anti-spam filtering in Microsoft Exchange.
EdgeSync replicates
safelist aggregation data to Edge Transport servers in the perimeter network.
EXAMPLE 1
This example updates Safe Senders List data for the single user kim@contoso.com.
Update-Safelist kim@contoso.com
B
Set-MalwareFilteringServer
Use the Set-MalwareFilteringServer cmdlet to configure the Malware agent settings in the
Transport service on a Mailbox server.
Example 1
This example sets the following Malware agent settings on the Mailbox server named Mailbox01:
Sets the update frequency interval to 2 hours
Sets the time to wait between resubmit attempts to 10 minutes
Set-MalwareFilteringServer Mailbox01 -UpdateFrequency 120 -DeferWaitTime 10
QUESTION 51
Hotspot Question
Your network contains an Active Directory forest named contoso.com.
The forest contains two sites named Site1 and Site2.
You have an Exchange Server 2013 organization that contains two servers.
The servers are configured as shown in the following table.

An administrator creates a new Active Directory site named Site3.
The administrator creates mailboxes for the users in Site3.
All of the mailboxes of the Site3 users are located on EX1.
Site3 contains a domain controller named dc3.contoso.com.
The Site3 users report that sometimes, when they open Microsoft Outlook, it takes a long time to
access their mailbox.
You need to reduce the amount of time it takes for the users to access their mailbox.
Which command should you run? (To answer, select the appropriate options in the dialog box in
the answer area.)

Free Download Braindump2go Latest Microsoft 70-341 Exam PDF
and VCE Dumps

261q from Braindump2go.com.

100% Pass Guaranteed! 100% Real Exam Questions!

braindump2go.com/70-341.html

Guarantee All Exams 100% Pass One Time!

Answer:

Explanation:
Autodiscover Service
Microsoft Exchange 2013 includes a service named the Autodiscover service. This topic gives an
overview of the service and explains how it works, how it configures Outlook clients, and what
options there are for deploying the Autodiscover service in your messaging environment.
The Autodiscover service does the following:
Automatically configures user profile settings for clients running Microsoft Office Outlook 2007,
Outlook 2010, or Outlook 2013, as well as supported mobile phones. Phones running Windows
Mobile 6.1 or a later version are supported. If your phone isn't a Windows Mobile phone, check
your mobile phone documentation to see if it's supported.
Provides access to Exchange features for Outlook 2007, Outlook 2010, or Outlook 2013 clients
that are connected to your Exchange messaging environment.
Uses a user's email address and password to provide profile settings to Outlook 2007, Outlook
2010, or Outlook 2013 clients and supported mobile phones. If the Outlook client is joined to a
domain, the user's domain account is used.
When you install a Client Access server in Exchange 2013, a default virtual directory named
Autodiscover is created under the default website in Internet Information Services (IIS). This virtual
directory handles Autodiscover service requests from Outlook 2007, Outlook 2010, and Outlook
2013 clients and supported mobile phones under the following circumstances:
When a user account is configured or updated
When an Outlook client periodically checks for changes to the Exchange Web Services URLs When
underlying network connection changes occur in your Exchange messaging environment
Additionally, a new Active Directory object named the service connection point (SCP) is created on
the server where you install the Client Access server. The SCP objec t contains the authoritative list
of Autodiscover service URLs for the forest. You can use the Set ClientAccessServer cmdlet to update the SCP object. For more information, see Set ClientAccessServer.
SECTION1
Set-ClientAccessServer EX1
Use the Set-ClientAccessServer cmdlet to set properties on specified Client Access server objects.
Use the Set-ClientAccessServer cmdlet to change AutoDiscover settings.
NOT Set-ExchangeServer
Use the Set-ExchangeServer cmdlet to set Exchange attributes in Active Directory for a specified
server.

Free Download Braindump2go Latest Microsoft 70-341 Exam PDF
and VCE Dumps

261q from Braindump2go.com.

100% Pass Guaranteed! 100% Real Exam Questions!

braindump2go.com/70-341.html

Guarantee All Exams 100% Pass One Time!
NOT Set-RPCClientAccess
Use the Set-RpcClientAccess cmdlet to manage the settings for the Exchange RPC Client Access
service that's running on a Microsoft Exchange Server 2010 Client Access server.
SECTION2
-AutoDiscoverSiteScope 'Site1;Site3'
The AutoDiscoverSiteScope parameter specifies the site for which the Autodiscover service is
authoritative.
Clients that connect to the Autodiscover service by using the internal URL must belong to a listed
site.
NOT -AutoDiscoverServiceInternalURI
The AutoDiscoverServiceInternalUri parameter specifies the internal URL of the Autodiscover
service.
Need to specify Site3
NOT -IgnoreDefaultScope
NOT a parameter of Set-ClientAccessServer
The IgnoreDefaultScope parameter instructs the command to ignore the default recipient scope
setting for the
Exchange Management Shell session and use the entire forest as the scope. This allows the
command to access Active Directory objects that aren't currently in the default scope. Using the
IgnoreDefaultScope parameter introduces the following restrictions:
You can't use the DomainController parameter. The command uses an appropriate global catalog
server automatically.
You can only use the DN for the Identity parameter. Other forms of identification, such as alias or
GUID, aren't accepted.
You can't use the OrganizationalUnit and Identity parameters together.
You can't use the Credential parameter.
NOT -DomainController
The DomainController parameter specifies the fully qualified domain name (FQDN) of the domain
controller that writes this configuration change to Active Directory.
Will not resolve the issue.
QUESTION 52
You deploy an Active Directory forest that contains two domains named contoso.com and
child.contoso.com.
You plan to deploy Exchange Server 2013 servers to the child.contoso.com domain.
You need to prepare Active Directory for the installation of the first Exchange Server 2013
servers.
Which command should you run in each domain? (To answer, drag the appropriate commands to
the correct domains. Each command may be used once, more than once, or not at all. You may
need to drag the split bar between panes or scroll to view content.)

Answer:

Free Download Braindump2go Latest Microsoft 70-341 Exam PDF
and VCE Dumps

261q from Braindump2go.com.

100% Pass Guaranteed! 100% Real Exam Questions!

braindump2go.com/70-341.html

Guarantee All Exams 100% Pass One Time!

Explanation:
THE SUPPLIED ANSWER IS CORRECT.
FOR 3 STEPS USE
1. SETUP/PREPARESCHEMA
2. SETUP/PREAREAD
3. SETUP /PREPAREDOMAIN
HOWEVER THE ANSWER ONLY PROVIDES FOR 2 STEPS.
IF YOU RUN SETUP /PREPAREAD THEN THIS COMMAND CHECKS TO SEE IF THE SCHEMA
EXTENSIONS HAVE BEEN INSTALLED
AND IF NOT THEN IT PROCEEDS TO INSTALL THEM.
HENCE SETUP /PREPAREAD IS CORRECT
A TRICK QUESTION FROM MICROSOFT TO CHECK IF YOU KNOW HOW SETUP
/PREPAREAD ACTUALLY OPERATES.
QUESTION 53
You have an Exchange Server 2013 organization.
Your company has a Service Level Agreement (SLA) stating that you must be able to reconnect
disconnected mailboxes to user accounts for up to 365 days.
After 365 days, disconnected mailboxes must be deleted permanently.
You need to recommend a solution to meet the SLA .
What should you include in the recommendation?
A.
B.
C.
D.

Create a retention policy and apply the policy to all mailboxes.
Configure the deleted mailbox retention setting for all databases.
Configure the deleted item retention setting for all databases.
Implement a database availability group (DAG) that contains a lagged copy.

Answer: B
Explantion:
Recoverable Items Folder Exchange 2013
The Recoverable Items folder replaces the feature known as the dumpster in Exchange Server
2007.
The Recoverable Items folder is used by the following Exchange features:
- Deleted item retention
- Single item recovery
- In-Place Hold
- Litigation hold
- Mailbox audit logging
- Calendar logging
- Disconnected Mailboxes
Each Microsoft Exchange mailbox consists of an Active Directory user account and the mailbox

Free Download Braindump2go Latest Microsoft 70-341 Exam PDF
and VCE Dumps

261q from Braindump2go.com.

100% Pass Guaranteed! 100% Real Exam Questions!

braindump2go.com/70-341.html

Guarantee All Exams 100% Pass One Time!
data stored in the Exchange mailbox database. All configuration data for a mailbox is stored in
the Exchange attributes of the Active Directory user object. The mailbox database contains the
mail data that's in the mailbox associated with the user account.
The following figure shows the components of a mailbox.

A disconnected mailbox is a mailbox object in the mailbox database that isn't associated with an
Active Directory user account.
There are two types of disconnected mailboxes:
Disabled mailboxes
When a mailbox is disabled or deleted in the Exchange Administration Center (EAC) or using the
Disable-Mailbox or Remove-Mailbox cmdlet in the Exchange Management Shell, Exchange
retains the deleted mailbox in the mailbox database, and switches the mailbox to a disabled state.
This is why mailboxes that are either disabled or deleted are referred to as disabled mailboxes.
The difference is that when you disable a mailbox, the Exchange attributes are removed from the
corresponding Active Directory user account, but the user account is retained. When you delete a
mailbox, both the Exchange attributes and the Active Directory user account are deleted.
Disabled and deleted mailboxes are retained in the mailbox database until the deleted mailbox
retention period expires, which is 30 days by default. After the retention period expires, the
mailbox is permanently deleted (also called purged). If a mailbox is deleted using the RemoveMailbox cmdlet, it's also retained for the duration of the retention period.
Important:
If a mailbox is deleted using the Remove-Mailbox cmdlet and either the Permanent or
StoreMailboxIdentity parameter, it will be immediately deleted from the mailbox database. To
identify the disabled mailboxes in your organization, run the following command in the Shell.
Get-MailboxDatabase | Get-MailboxStatistics | Where { $_.DisconnectReason -eq "Disabled" } | ft
DisplayName,Database,DisconnectDate
Soft-deleted mailboxes
When a mailbox is moved to a different mailbox database, Exchange doesn't fully delete the
mailbox from the source mailbox database when the move is complete. Instead, the mailbox in
the source mailbox database is switched to a soft-deleted state. Like disabled mailboxes, softdeleted mailboxes are retained in the source database either until the deleted mailbox retention

Free Download Braindump2go Latest Microsoft 70-341 Exam PDF
and VCE Dumps

261q from Braindump2go.com.

100% Pass Guaranteed! 100% Real Exam Questions!

braindump2go.com/70-341.html

Guarantee All Exams 100% Pass One Time!
period expires or until the Remove-StoreMailbox cmdlet is used to purge the mailbox.
Run the following command to identify soft-deleted mailboxes in your organization. GetMailboxDatabase | Get-MailboxStatistics | Where { $_.DisconnectReason -eq "SoftDeleted" } | ft
DisplayName,Database,DisconnectDate
NOT A
Need to modify the deleted mailbox retention settings
NOT C
Not related to an item but to databases
NOT D
Need to modify the deleted mailbox retention settings.
DAG with a lagged copy is not modifying the mailbox retention policy settings.
B
Disabled and deleted mailboxes are retained in the mailbox database until the deleted mailbox
retention period expires, which is 30 days by default.
This example configures a deleted item retention period of 365 days for the mailbox database
MDB2.
Set-MailboxDatabase -Identity MDB2 -DeletedItemRetention 365
Content can be retained using a variety of built-in functions such as:
Journaling: With journaling, the organization can have exact copies of content captured and
retained in a separate database (a "journaling database") to ensure the content has not been
tampered with and is available for legal search and review at a future time Retention Policy:
Content within an Exchange environment can be set to be retained (or purged) based on policies
set on the Exchange databases, so either configured through the Exchange Admin console or
through a PowerShell command like Set-MailboxDatabase -Identity MDB4 -eletedItemRetention
365 to hold content from being deleted off the Exchange server
Personal Archives: Each user in Exchange can have their primary mailbox and an Archive
mailbox where the archive mailbox can have content drag/dropped to the archive box for long
term storage, similar to what users have historically used Personal Store (PST) files in the past.
Unlike a PST file that is almost completely unmanaged by the organization (yet is still considered
legal evidence), the Personal Archive in Exchange is part of the Exchange environment with
content that can be searched, set for long term retention, and put on legal hold.

Free Download Braindump2go Latest Microsoft 70-341 Exam PDF
and VCE Dumps

261q from Braindump2go.com.

100% Pass Guaranteed! 100% Real Exam Questions!

braindump2go.com/70-341.html

Guarantee All Exams 100% Pass One Time!

QUESTION 54
A user fails to connect to his mailbox by using Outlook Anywhere.
The user successfully connects to the mailbox by using an Exchange ActiveSync -enabled mobile
device and Outlook Web App.
You need to identify what prevents the users from connecting to the mailbox by using Outlook
Anywhere.
Which tool should you use?
A.
B.
C.
D.
E.
F.
G.
H.

Microsoft Outlook
Microsoft Exchange Server Deployment Assistant
Microsoft Exchange RPC Extractor
Microsoft Exchange Server Profile Analyzer
Microsoft Exchange Server User Monitor
Microsoft Exchange Load Generator
Exchange Remote Connectivity Analyzer
Exchange Server MAPI Editor

Free Download Braindump2go Latest Microsoft 70-341 Exam PDF
and VCE Dumps

261q from Braindump2go.com.

100% Pass Guaranteed! 100% Real Exam Questions!

braindump2go.com/70-341.html

Guarantee All Exams 100% Pass One Time!
Answer: G
Explanation:
G
Exchange Remote Connectivity Analyzer (ExRCA
The Exchange Remote Connectivity Analyzer (ExRCA) is a web-based tool designed to test
connectivity with a variety of Exchange protocols. You can access the ExRCA
https://www.testexchangeconnectivity.com/.
The Microsoft Exchange Remote Connectivity Analyzer (ExRCA) can help you confirm that
connectivity for your Exchange servers is configured correctly and diagnose any connectivity issues.
The Remote Connectivity
Analyzer website offers tests for Microsoft Exchange ActiveSync, Exchange Web Services ,
Microsoft Outlook, and Internet email.

Exchange Remote Connectivity Analyzer Tool

Free Download Braindump2go Latest Microsoft 70-341 Exam PDF
and VCE Dumps

261q from Braindump2go.com.

100% Pass Guaranteed! 100% Real Exam Questions!

braindump2go.com/70-341.html

Guarantee All Exams 100% Pass One Time!
QUESTION 55
Drag and Drop Question
You have an Exchange Server 2013 organization that contains a database availability group
(DAG).
There are four copies of every mailbox database.
One of the copies is a lagged copy configured to have a replay lag time of 14 days.
All mailboxes have single item recovery enabled.
All databases are configured to have a deleted item retention period of seven days.
A company executive reports that an email message, which was deleted 10 days ago, must be
restored.
You need to ensure that you can recover the email message from the lagged copy of the mailbox
database.
The solution must preserve the lagged copy of the mailbox database.
Which three actions should you perform? To answer, move the three appropriate actions from the
list of actions to the answer area and arrange them in the correct order.

Answer:

Explanation:
Run the Suspend-MailboxDatabaseCopy cmdlet.
Run the vssadmin command.
Run the eseutil.exe command.
vssadmin
Displays current volume shadow copy backups and all installed shadow copy writers and providers
in the command window.
There could be VSS errors causing the datasources not to enumerate. If so, verify that all Exchange
Node and Exchange VSS components are functional. Ensure all databases are mounted and
healthy Run vssadmin list writers Move-ActiveMailboxDatabase

Free Download Braindump2go Latest Microsoft 70-341 Exam PDF
and VCE Dumps

261q from Braindump2go.com.

100% Pass Guaranteed! 100% Real Exam Questions!

braindump2go.com/70-341.html

Guarantee All Exams 100% Pass One Time!
Use the Move-ActiveMailboxDatabase cmdlet to perform a database or server switchover. This
example performs a switchover of the database DB2 to the Mailbox server MBX1. When the
command completes, MBX1 hosts the active copy of DB2.
Because the MountDialOverride parameter is set to None, MBX1 mounts the database using its
own defined database auto mount dial settings.
Move-ActiveMailboxDat abase DB2 -ActivateOnServer MBX1 -MountDialOverride:
None The SkipLagChecks parameter specifies whether to allow a copy to be activated that has
replay and copy queues outside of the configured criteria.
eseutil.exe
The key to matching log files and databases is the signature. You can view log file signatures by
using the
Exchange Server Database Utilities (Eseutil.exe) tool and viewing the log file header with the
command Eseutil/ml [log filename].
You can view database (.edb) and streaming database (.stm) file signatures by viewing the file
header with Eseutil /mh [database filename].edb.
A typical log file or database file signature looks like this:
Signature: Create time:12/17/2002 18:1:44 Rand:81060559 Computer:
Activating and recovering a lagged mailbox database copy is an easy process if you want the
database to replay all log files and make the database copy current. If you want to replay log files
up to a specific point in time, it's a more difficult operation because you manually manipulate log
files and run Exchange Server Database Utilities (Eseutil.exe). Suspend-MailboxDatabaseCo py
Use the Suspend-MailboxDatabaseCopy cmdlet to block replication and replay activities (log
copying and replay) or activation for a database configured with two or more database copies.
For a variety of reasons, such as performing planned maintenance, it may be necessary to suspend
and resume continuous replication activity for a database copy. In addition, some administrative
tasks, such as seeding, require you to first suspend a database copy. We recommend that all
replication activity be suspended when the path for the database or its log files is being changed.
You can suspend and resume database copy activity by using the EAC, or by running the SuspendMailboxDatabaseCopy and Resume-MailboxDatabaseCopy cmdlets in the Shell.
EXAMPLE 1
This example suspends replication and replay activity for the copy of the database DB1 hosted on
the Mailbox server MBX3. An optional administrative reason for the suspension is specified.
Suspend-MailboxDatabaseCopy -Identity DB1\MBX3 -SuspendComment "Maintenance on MBX3"
NOT Move-ActiveMailbox Database
Not attempting to make a passive or lagged database active. You need to ensure that you can
recover the email message from the lagged copy of the mailbox database.
The solution must preserve the lagged copy of the mailbox database.
STEPS
No need to use Move-ActiveMailboxDatabase
1. First Use the Suspend-MailboxDatabaseCopy cmdlet to block replication and replay activities
(log copying and replay)
2. 2nd use vssadmin to check that there could be VSS errors causing the datasources not to
enumerate.
3. 3rd Run Exchange Server Database Utilities (Eseutil.exe).
THIS LAST STEP NEEDS CLARIFYING

Free Download Braindump2go Latest Microsoft 70-341 Exam PDF
and VCE Dumps

261q from Braindump2go.com.

100% Pass Guaranteed! 100% Real Exam Questions!

braindump2go.com/70-341.html

Sign up to vote on this title
UsefulNot useful

Master Your Semester with Scribd & The New York Times

Special offer: Get 4 months of Scribd and The New York Times for just $1.87 per week!

Master Your Semester with a Special Offer from Scribd & The New York Times