Software Activation on Cisco Integrated

Services Routers and Cisco Integrated Service
Routers Generation 2
First Published: October 20, 2009
Revised: April 12, 2012

This document describes the activation process for Cisco software on Cisco Integrated Services Routers
(ISRs) and Cisco Integrated Service Routers Generation 2 (ISR G2). Cisco routers support Cisco IOS
software entitlement and enforcement on various platforms. This document supports the following
products:
Modular ISRs G2

Fixed ISRs

Cisco 3900 Series ISR

Cisco 2900 Series ISR

Cisco 1900 Series ISR

Cisco 890 Series ISR

Cisco 880 Series ISR

Cisco 860 Series ISR

Finding Support Information for Platforms and Cisco IOS and Catalyst OS Software Images

Use Cisco Feature Navigator to find information about platform support and Cisco IOS and Catalyst OS
software image support. To access Cisco Feature Navigator, go to http://www.cisco.com/go/cfn. An
account on Cisco.com is not required.

Contents
This document contains the following topics:

Before You Begin, page 2

Cisco IOS Software Releases Supported, page 2

Americas Headquarters:
Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA

Software Activation on Cisco Integrated Services Routers and Cisco Integrated Service Routers Generation 2
Before You Begin

Information About Software Activation on Cisco ISRs and ISRs G2, page 3

Software Packages and Features, page 4

Options for Getting and Managing Software Licenses, page 10

RMA License Transfer, page 42

Software Activation on Modules, page 43

Additional References, page 44

Before You Begin
When you order a new router, it is shipped preinstalled with the software image and the corresponding
permanent licenses for the packages and features that you specified. You do not need to activate or
register the software before use.
The following prerequisites apply if you are upgrading or installing a new Cisco IOS software license
on Cisco ISRs:

Purchase the software package or feature you want to install. You will receive a product activation
key (PAK) with your purchase.

If you do not have a cisco.com username and password, get your username and password by
registering at Cisco.com.

Familiarize yourself with the Cisco software licensing concepts detailed in the Cisco Software
Activation Conceptual Overview chapter in Cisco IOS Software Activation Configuration Guide.

Tip

Use the show license feature command to view the software packages and features supported on your
router. Table 2, Table 3, and Table 5 list the package and feature licenses available for your router.

Tip

Use the show license command in privileged EXEC mode to display information about the Cisco IOS
software packages and features license level on your router.

Cisco IOS Software Releases Supported
The following Cisco IOS software releases support software activation on Cisco ISRs:

Cisco 3900 series, 2900 series, and 1900 series ISRs running Cisco IOS Release 15.0(1)M.
– Cisco 3925E and Cisco 3945E ISR running Cisco IOS Release 15.1(1)T.

Right to Use license is supported on Cisco IOS Release 15.0(1)M4, 15.1(1)T2, 15.1(2)T2, 15.1(3)T,
15.1(4)M1, or later.

Cisco 800 series ISRs running Cisco IOS Release 12.4(15)XZ or later support either the
non-cryptographic image or the cryptographic image.

Cisco 800 series ISRs running Cisco IOS Release images earlier than Cisco IOS Release
12.4(15)XZ do not support software activation.

Software Activation on Cisco Integrated Services Routers and Cisco Integrated Service Routers Generation 2

2

OL-20697-03

Software Activation on Cisco Integrated Services Routers and Cisco Integrated Service Routers Generation 2
Information About Software Activation on Cisco ISRs and ISRs G2

Information About Software Activation on Cisco ISRs and
ISRs G2
The Cisco IOS universal image contains all packages and features in one image. You can access the
required functionality based on the license installed on your router.
Software Claim Certificate and License Activation

Software Claim Certificates are used for licenses that require software activation. The claim certificate
provides the Product Activation Key (PAK) for your license and important information regarding the
Cisco End User License Agreement (EULA).
In most cases, Cisco or your Cisco partner will have already activated the licenses ordered at the time of
purchase and no Software Claim Certificate is provided. You can determine the licenses activated on
your system by issuing the show license feature command on the router command-line interface (CLI)
or with a Cisco management application such as Cisco CP or Cisco License Manager (CLM). Cisco
License Manager is a free software application available at http://www.cisco.com/go/clm.
Right to Use Notification

When you order a license from Cisco, you will receive a Right to Use Notificaton. You may begin using
the licensed features upon receipt of the Right to Use Notification. Keep the Right to Use Notification
for your records as proof of your license purchase.
Universal Device Identifier

The universal device identifier (UDI) has two main components: the product ID (PID) and the serial
number (SN). For Cisco 3900 Series platforms that use field-replaceable unit (FRU) motherboards, the
motherboard PID and SN are used. All other platforms use the chassis PID and SN.
The PID and SN are printed on a label located on the back of most Cisco hardware devices or on a label
tray visible on the front panel of field-replaceable motherboards. See your router’s Hardware
Installation Guide or Read Me First to see the location of the label.

Tip

The Cisco Product Identification (CPI) tool provides detailed illustrations and descriptions
showing where to locate serial number labels on Cisco products. The Cisco Product
Identification tool can be accessed at http://tools.cisco.com/Support/CPI/index.do.

The UDI can be viewed using the show license udi command in privileged Exec mode.
UDI Example

The following example shows the output from the show license udi command on a Cisco 3925 ISR:
Router#show license udi
Device#
PID
SN
UDI
----------------------------------------------------------------------------*0
C3900-SPE100/K9
FHH13030044
C3900-SPE100/K9:FHH13030044
Router#

Evaluation License

Your router comes with the evaluation license, also known as a temporary license, for most packages and
features supported on your router. If you want to try a new software package or feature, activate the
evaluation license for that package or feature.

Software Activation on Cisco Integrated Services Routers and Cisco Integrated Service Routers Generation 2
OL-20697-03

3

Software Activation on Cisco Integrated Services Routers and Cisco Integrated Service Routers Generation 2
Software Packages and Features

Right to Use License

Right to Use licenses are available on Cisco IOS Release 15.0(1)M4, 15.1(1)T2, 15.1(2)T2, 15.1(3)T,
15.1(4)M1, or later. These licenses are available on the honor system.
Permanent License

If you want to permanently activate a software package or feature on your router, you must get a new
software license.
Figure 1 shows the steps for software activation.
Figure 1

Steps for Software Activation

1
Purchase a Package or Feature
Receive a PAK

Option 1

2
Obtain a License.
A PAK and UDI is required

Option 2

Receive
License File
Option 3

Cisco License Manager

Cisco License Portal
Http://www.cisco.com

Cisco Call Home

Install License

275364

3

End User License Agreement

By accessing or using the Cisco products received with your Cisco ISR or ISR G2, you agree that your
use of such products is governed by the terms and conditions of the Cisco Software License and any
applicable supplemental license agreement. A copy of the terms of the End User License Agreement
(EULA) is available at http://www.cisco.com/en/US/docs/general/warranty/English/EU1KEN_.html.
A EULA is presented for acceptance when you activate an evaluation license.

Software Packages and Features
The Cisco IOS universal image contains all packages and features in one image. The universal image on
the Cisco 1900, 2900, and 3900 series ISRs are a superset of Cisco IOS simplified technology packages.
Each package is a grouping of technology-specific features. Multiple technology package licenses can
be installed and activated on the Cisco 1900, 2900, and 3900 series ISR platforms.
Individual features can be enabled or disabled by license keys. Feature licenses may be
subscription-based, uncounted, or count-based licenses.

Software Activation on Cisco Integrated Services Routers and Cisco Integrated Service Routers Generation 2

4

OL-20697-03

CISCO1941W c1900-universalk9-mz c1900-universalk9_npe-mz CISCO2901. CISCO3945E c3900e-universalk9-mz c3900e-universalk9_npe-mz The following sections provide information on the technology package and feature licenses available on your router. The Cisco 1900. and 3900 series ISRs support the following universal images: • universalk9—offers all IOS features supported by next generation ISRs. CISCO2921 c2900-universalk9-mz c2900-universalk9_npe-mz CISCO2951 c2951-universalk9-mz c2951-universalk9_npe-mz CISCO3925. CISCO 1921 c1900-universalk9-mz c1900-universalk9_npe-mz CISCO1941.Software Activation on Cisco Integrated Services Routers and Cisco Integrated Service Routers Generation 2 Software Packages and Features Tip Use the show license feature command to view the technology package licenses and feature licenses supported on your router. page 6 • Feature Licenses. page 8 • Platform Limitations. CISCO2911. 2900 Series. page 10 Software Activation on Cisco Integrated Services Routers and Cisco Integrated Service Routers Generation 2 OL-20697-03 5 . • universalk9_npe—does not support VPN payload and secure voice functionality and satisfies import considerations for CIS countries. page 7 • Evaluation and Right to Use Licenses. • Technology Package Licenses. 2900 series. 2900. CISCO3945 c3900-universalk9-mz c3900-universalk9_npe-mz CISCO3925E. page 8 • Resource Allocation with securityk9 Technology Package License. Table 1 Universal Image Names for Cisco 1900 Series. and 3900 ISRs Platform Image Name CISCO 1905. Table 1 lists the image names for the Cisco 1900 series. and 3900 series routers.

use the Cisco Feature Navigator at: http://www. Table 2 Technology Package Licenses Supported on Fixed Cisco ISR Platforms Technology Package License 860 Series 880 Series 890 Series Advanced Security Yes Yes — Advanced IP Services Yes Yes Yes Table 3 lists the technology package licenses supported on Cisco ISR G2 platforms.cisco. Table 3 Technology Package Licenses Supported on Modular Cisco ISR G2 Platforms Technology Package License 1900 Series 2900 Series 3900 Series ipbasek9 Yes Yes Yes Yes Yes Yes Yes Yes Yes datak9 Yes Yes Yes uck9 (Unified Communications) — Yes Yes securityk9_npe1 securityk9 2 1. Supported only on the universalk9_npe-mz image. For a list of features available in a technology package license. Supported only on the universalk9-mz image.com/go/cfn Table 2 lists the technology package licenses supported on Cisco ISR platforms. Software Activation on Cisco Integrated Services Routers and Cisco Integrated Service Routers Generation 2 6 OL-20697-03 .Software Activation on Cisco Integrated Services Routers and Cisco Integrated Service Routers Generation 2 Software Packages and Features Technology Package Licenses The features available in a technology package license may differ from platform to platform. 2.

Cisco model 1905 only. and 3900 Platforms Feature License Required Technology 1900 Package License Series 2900 Series 3900 Series Memory License — Yes1 — — Gatekeeper uck9 (Unified Communications) — Yes Yes SNA Switching (SNASw) datak9 — Yes Yes IPS (Subscription) securityk9 or securityk9_npe Yes Yes Yes SSL_VPN2 (Counted) securityk9 Yes Yes hseck9 3 CME-SRST securityk9 — Yes uck9 (Unified Communications) — Yes Yes 4 Yes Yes 1. The following section lists the feature licenses available on the fixed and modular Cisco ISR platforms: • Table 4—Feature Licenses Supported on Fixed Cisco ISR Platforms. Table 5 Feature Licenses Supported on Modular Cisco 1900. page 7 Table 4 lists the feature licenses available on the fixed Cisco ISR platforms. Table 4 Feature Licenses Supported on Fixed Cisco ISR Platforms Feature License 860 Series 880 Series 890 Series IPS (Subscription) — Yes Yes SSL_VPN1 (Counted) — Yes Yes 1. 2900. 2. and 3900 Platforms. 2900. Only 2921 and 2951 routers support the hseck9 feature license.Software Activation on Cisco Integrated Services Routers and Cisco Integrated Service Routers Generation 2 Software Packages and Features Feature Licenses Note Enabling a feature license may require that a particular technology package license be installed and enabled on the router. 4. The hseck9 features are supported only on the universalk9-mz image. Table 5 lists the feature licenses available on Cisco ISR G2 platforms and the required technology package license. 3. Software Activation on Cisco Integrated Services Routers and Cisco Integrated Service Routers Generation 2 OL-20697-03 7 . The SSL_VPN features are supported only on the universalk9-mz image. The SSL_VPN features are supported only on the universalk9-mz image. page 7 • Table 5—Feature Licenses Supported on Modular Cisco 1900.

3. Supported only on the universalk9-mz image.Software Activation on Cisco Integrated Services Routers and Cisco Integrated Service Routers Generation 2 Software Packages and Features Evaluation and Right to Use Licenses Table 6 lists the Evaluation and Right to Use licenses available on the Fixed Cisco ISRs and Cisco ISR G2 platforms. Supported only on the universalk9_npe-mz image. The SSL_VPN features are supported only on the universalk9-mz image. IPSec. Resources are reserved or released as needed. Maximum:1000 Software Activation on Cisco Integrated Services Routers and Cisco Integrated Service Routers Generation 2 8 OL-20697-03 . Table 7 Resource Allocation with securityk9 Technology Package License Client Tx Bandwidth1 Rx Bandwidth2 Tunnels3 TLS Sessions Voice Necessary bandwidth is reserved or released as needed. 4. and TLS sessions for voice. Resources are reserved or released as needed. Table 6 Evaluation and Right to Use Licenses Technology Package or Feature Evalualtion License Right to Use License Technology Package Advanced Security — — Advanced IP Services Yes Yes ipbasek9 — — Yes Yes Yes Yes datak9 Yes Yes uck9 (Unified Communications) Yes Yes Memory License Yes Yes Gatekeeper Yes Yes SNA Switching (SNASw) Yes Yes IPS (Subscription) Yes Yes Yes Yes — — Yes Yes securityk9_npe securityk9 1 2 Feature Licenses 3 SSL_VPN (Counted) hseck9 4 CME-SRST 1. number of tunnels. 2. and SSLVPN are allocated with a securityk9 technology package license. Resource Allocation with securityk9 Technology Package License Table 7 shows how resources such as bandwidth. The hseck9 features are supported only on the universalk9-mz image. Necessary bandwidth is reserved or released as needed.

NA TLS Sessions 1.000 Kbps. The following output shows an example of the resource allocation for a securityk9 license: Router#show platform cerm-information Crypto Export Restrictions Manager(CERM) Information: CERM functionality: ENABLED ---------------------------------------------------------------Resource Maximum Limit Available ---------------------------------------------------------------Tx Bandwidth(in kbps) 85000 85000 Rx Bandwidth(in kbps) 85000 85000 Number of tunnels 225 225 Number of TLS sessions 1000 1000 Resource reservation information: D . Dynamically uses Resources are available bandwidth. Dynamically uses Resources are available bandwidth. To view the resource allocated on your router. reserved or released as needed. reserved or released as needed.000 Kbps. 2. The maximum bandwidth in the egress is 85. 3. NA SSLVPN Dynamically uses available bandwidth. The maximum cumulative tunnels are 225.Dynamic ----------------------------------------------------------------------Client Tx Bandwidth Rx Bandwidth Tunnels TLS Sessions (in kbps) (in kbps) ----------------------------------------------------------------------VOICE 0 0 0 0 IPSEC D D 0 N/A SSLVPN D D 0 N/A Statistics information: Failed tunnels : 0 Failed sessions : 0 Failed tx bandwidth: 0 Failed rx bandwidth: 0 Failed encrypt pkts: 0 Failed decrypt pkts: 0 Failed encrypt pkt bytes: Failed decrypt pkt bytes: Passed encrypt pkts: 0 Passed decrypt pkts: 0 Passed encrypt pkt bytes: Passed decrypt pkt bytes: Note 0 0 0 0 An hseck9 feature license provides enhanced payload encryption functionality with increased VPN tunnel counts and secure voice sessions. The maximum bandwidth in the ingress is 85. Software Activation on Cisco Integrated Services Routers and Cisco Integrated Service Routers Generation 2 OL-20697-03 9 . use the show platform cerm-information command.Software Activation on Cisco Integrated Services Routers and Cisco Integrated Service Routers Generation 2 Software Packages and Features Table 7 Resource Allocation with securityk9 Technology Package License (continued) Client Tx Bandwidth1 Rx Bandwidth2 Tunnels3 IPSec Dynamically uses available bandwidth.

and manage your license. and SRST Feature Licenses Platform SSL VPN CME SRST 860.880 10 — — 890 25 — — 1941 75 — — 2901 100 35 35 2911 100 50 50 2921 100 100 100 2951 150 150 150 3925 200 250 250 3945 200 350 350 3925E 1. and clear software licenses using Simple Network Management Protocol (SNMP). • Simple Network Management Protocol—lets you install. • Cisco License Call Home—lets you interact with the Cisco Product License Registration portal directly from your router to get. See the “Cisco License Call Home” section on page 11 for details. See the “Simple Network Management Protocol” section on page 42 for details. and manage software licenses on multiple devices on your network. register. Table 8 Maximum number of licenses for SSLVPN. See the “RTU Migration” section on page 36 for details. and SRST feature licenses. See the “Cisco License Manager” section on page 11 for details. install. • Cisco Product License Registration Portal—lets you manually get and register individual software licenses through a registration portal.500 400 400 3945E 1. CME. Use one of the following options to get and manage software licenses on your router: • Cisco License Manager—software application that lets you get.500 450 450 Options for Getting and Managing Software Licenses There are multiple options for getting and managing the software licenses on your router. • Cisco IOS CLI—lets you install and manage licenses using the Cisco IOS command-line interface (CLI). CME. Software Activation on Cisco Integrated Services Routers and Cisco Integrated Service Routers Generation 2 10 OL-20697-03 . install. See the “Cisco Product License Registration Portal” section on page 12 for details.Software Activation on Cisco Integrated Services Routers and Cisco Integrated Service Routers Generation 2 Options for Getting and Managing Software Licenses Platform Limitations Table 8 shows the maximum number of licenses allowed for SSL VPN. See the “Cisco IOS CLI” section on page 12 for details. • RTU Migration—lets you migrate to an Existing or Lifetime RTU release and recommends steps you must perform before upgrading. view.

cisco. Software Activation on Cisco Integrated Services Routers and Cisco Integrated Service Routers Generation 2 OL-20697-03 11 . see the Cisco Software Activation Conceptual Overview chapter in Cisco IOS Software Activation Configuration Guide and the documents at http://www. Cisco License Call Home You can interact directly with the Cisco Product License Registration portal from your device by using the Cisco License Call Home interface. and then connecting to the Cisco licensing back-end to interact with the Cisco licensing infrastructure. The application also keeps an inventory of deployed licenses and generates license reports. page 11 • Platform Support. A request is initiated by a License Call Home EXEC command. This interface is included with the Cisco Software Activation feature and described in the Cisco Software Activation Conceptual Overview and the Configuring Cisco License Call Home chapters in Cisco IOS Software Activation Configuration Guide.Software Activation on Cisco Integrated Services Routers and Cisco Integrated Service Routers Generation 2 Options for Getting and Managing Software Licenses Cisco License Manager For a network-wide deployment.com/en/US/products/ps7138/tsd_products_support_series_home. The License Call Home feature works as a client or server model. This section contains the following topics: • Before You Begin. and the response is provided by the Cisco licensing infrastructure. For information about platform support. see the Configuring Cisco License Call Home chapter in Cisco IOS Software Activation Configuration Guide. Platform Support Only certain platforms support the Cisco License Call Home function and must run a Cisco IOS crypto K9 image. For additional information on Cisco License Manager. Each transaction requires a separate connection to the Cisco licensing infrastructure. Cisco License Manager is available at no cost and can be downloaded by registered Cisco.com and deploying the obtained licenses to managed devices on a network-wide basis.com users from http://www.cisco.com/go/clm. page 12 Before You Begin Your router must have an Internet connection and use HTTPS to connect to the Cisco licensing infrastructure.html. the Cisco License Manager can automate all license-related work flows by securely communicating with the licensing back-end fulfillment systems at Cisco. The License Call Home feature displays prompts for obtaining required information. converting that information into a defined data structure. page 11 • Installing a License Using License Call Home.

To install a license using the License Call Home feature. Step 3 To obtain additional licenses. page 12 Getting a Permanent License Using Cisco License Portal To get a permanent license. Step 1 Enter the appropriate information at http://www. perform the steps detailed in this section.Software Activation on Cisco Integrated Services Routers and Cisco Integrated Service Routers Generation 2 Options for Getting and Managing Software Licenses Installing a License Using License Call Home Note Purchase the software feature or package you want to install.com/go/license. page 16 • Activating an Evaluation License. Cisco Product License Registration Portal Use the Cisco Product License Registration Portal at http://www. page 18 Software Activation on Cisco Integrated Services Routers and Cisco Integrated Service Routers Generation 2 12 OL-20697-03 .cisco. page 13 • Activating CME-SRST Feature License. Cisco IOS CLI Use the Cisco IOS CLI to install and manage the software licenses on your router.com/go/license to manually perform the following licensing tasks: • Get a license • Register for an RMA license • Look-up a license This section contains the following topic: • Getting a Permanent License Using Cisco License Portal.cisco. Step 2 Download the license file or receive the license file by e-mail. a. Step 2 Use the license call-home install pak command to install a license by using the Cisco License Call Home function. repeat Step 1 and Step 2. You receive a product activation key (PAK) with your purchase. follow these steps: Step 1 Use the show license call-home pak EXEC command to display the SKU list and features available for the PAK provided. Complete the license installation by entering yes when prompted to install the license and then entering the information requested. This section contains the following procedures: • Installing a Permanent License Using Cisco IOS CLI.

2900 series.xml Software Activation on Cisco Integrated Services Routers and Cisco Integrated Service Routers Generation 2 OL-20697-03 13 . • Enter your password if prompted. Example: Router)# license install flash0:uck9-C3900-SPE150_K9-FHH12250057. page 21 • Activating an SNA Switching Feature License. Note You can install multiple licenses on the Cisco 3900 series. page 24 • Activating the SSL_VPN Feature License. SUMMARY STEPS 1.Software Activation on Cisco Integrated Services Routers and Cisco Integrated Service Routers Generation 2 Options for Getting and Managing Software Licenses • Activating a Memory Evaluation License. page 25 • Activating the Gatekeeper Feature License. and 1900 series ISRs. page 31 • Verifying Licenses and Other Licensing Tasks. perform the steps detailed in this section. page 25 • Configuring the hseck9 Feature License. enable 2. page 26 • Configuring the EULA. page 23 • Activating the IPS Feature License. page 32 Installing a Permanent License Using Cisco IOS CLI To install a permanent license. reload DETAILED STEPS Step 1 Command or Action Purpose enable Enables privileged EXEC mode. license install stored-location-url 3. page 25 • Clearing an Active Permanent Technology Package License. Example: Router> enable Step 2 license install stored-location-url Installs a license file.

4(24.. C3900 Software (C3900-UNIVERSALK9-M).0 was installed in this device.6)PI11k PI11 ENGINEERING WEEKLY BUILD. Example The following example shows how to install a license: Router> enable Router# license install flash0:uck9-C3900-SPE150_K9-FHH12250057.com/en/US/docs/routers/access/sw_activation/license_install_demo/license_install_ demo.Software Activation on Cisco Integrated Services Routers and Cisco Integrated Service Routers Generation 2 Options for Getting and Managing Software Licenses Step 3 Command or Action Purpose reload (Optional) Reloads the router. See the “Activating the IPS Feature License” section on page 24 for additional information on configuring the IPS feature license.cisco. To activate the SNAsw feature license. UDI=C3900-SPE150/K9:FHH12250057.. Version 12. See the “Activating a Memory Evaluation License” section on page 21 for additional information on configuring a memory license.615: %IOS_LICENSE_IMAGE_APPLICATION-6-LICENSE_LEVEL: Module name = c3900 Next reboot level = uck9 and License = uck9 Router# reload Router# show version Cisco IOS Software..Successful:Supported 1/1 licenses were successfully installed 0/1 licenses were existing licenses 0/1 licenses were failed to install upt-3945-1# *Jul 7 17:24:57.Feature:uck9. See the “Activating the SSL_VPN Feature License” section on page 25 for additional information on configuring the SSL_VPN feature license.xml" Installing. perform the steps detailed in the “Activating an SNA Switching Feature License” section on page 23. Screencast The following screencast shows how to install a license: http://www.xml Installing licenses from "uck9-C3900-SPE150_K9-FHH12250057. StoreIndex=15:Primary License Storage *Jul 7 17:24:57. A reload is not required if an evaluation license is active. synced to V124_24_6_T9 Copyright (c) 1986-2009 by Cisco Systems..391: %LICENSE-6-INSTALL: Feature uck9 1. Software Activation on Cisco Integrated Services Routers and Cisco Integrated Service Routers Generation 2 14 OL-20697-03 . See the “Configuring the hseck9 Feature License” section on page 25 for additional information on configuring the hseck9 feature license.swf. Example: Router# reload A reload is required to activate a technology package license if an evaluation license is not active. Inc.

Delivery of Cisco cryptographic products does not imply third-party authority to import.0) with 2025472K/71680K bytes of memory.com/wwl/export/crypto/tool/stqrg. laws governing Cisco cryptographic products may be found at: http://www. 3 hours. Cisco C3945 (revision 1.S. 53 minutes System returned to ROM by power-on System image file is "flash0:c3900-universalk9-mz. export. Importers.SSA.6. Processor board ID FHH1226P01E 3 Gigabit Ethernet interfaces 4 Serial(sync/async) interfaces 2 ISDN Basic Rate interfaces 1 ATM interface 25 terminal lines 1 Virtual Private Network (VPN) Module DRAM configuration is 72 bits wide with parity enabled. export. Version 15. distributors and users are responsible for compliance with U.Software Activation on Cisco Integrated Services Routers and Cisco Integrated Service Routers Generation 2 Options for Getting and Managing Software Licenses Compiled Mon 15-Jun-09 15:27 by pallavik ROM: System Bootstrap.html If you require further assistance please contact us by sending email to export@cisco. and local laws. exporters. return this product immediately. By using this product you agree to comply with applicable laws and regulations. and local country laws. distribute or use encryption.124-24.PI11k" This product contains cryptographic features and is subject to United States and local country laws governing import. 255K bytes of non-volatile configuration memory.com. transfer and use. If you are unable to comply with U.0(1r)M. RELEASE SOFTWARE (fc1) upt-3945-1 uptime is 1 day.S.cisco. 2000880K bytes of ATA System CompactFlash 0 (Read/Write) License Info: License UDI: ------------------------------------------------Device# PID SN ------------------------------------------------*0 C3900-SPE150/K9 FHH12250057 Technology Package License Information for Module:'c3900' ---------------------------------------------------------------Technology Technology-package Technology-package Current Type Next reboot ----------------------------------------------------------------ipbase ipbasek9 Permanent ipbasek9 security None None None uc uck9 Permanent uck9 data None None None Configuration register is 0x0 Software Activation on Cisco Integrated Services Routers and Cisco Integrated Service Routers Generation 2 OL-20697-03 15 . A summary of U.S.

configure terminal 3. show license detail cme-srst 2. Prerequisites • UCK9 license • ISR G2 already accepts UC CLIs • CME-SRST feature must be configured 1.Software Activation on Cisco Integrated Services Routers and Cisco Integrated Service Routers Generation 2 Options for Getting and Managing Software Licenses Activating CME-SRST Feature License The ISR G2 comes with a 60-day evaluation license. Note CME-SRST RTU license is introduced in Cisco IOS release 15. the license changes to “right to use”. Example: Router# show license detail cme-srst Step 2 configure terminal Enters global configuration mode. After 60 days. write mem SUMMARY STEPS DETAILED STEPS Step 1 Command or Action Purpose show license detail cme-srst Displays the available cme-srst license. exit 5. Example: Router# configure terminal Step 3 license accept end user agreement Configures a one-time acceptance of the EULA for cme-srst license. The customer is required to pay for the CME-SRST feature license which is valid for 12 years. Router(config)# license accept end user agreement Step 4 exit Exits global configuration mode. show license detail cme-srst 6. license accept end user agreement 4. EULA should be in NOT ACCEPTED state. Example: Accepts EULA by typing YES. Example: Router(config)# exit Software Activation on Cisco Integrated Services Routers and Cisco Integrated Service Routers Generation 2 16 OL-20697-03 .1(3)T and higher.

You may use this product feature on an evaluation basis.Software Activation on Cisco Integrated Services Routers and Cisco Integrated Service Routers Generation 2 Options for Getting and Managing Software Licenses Step 5 Command or Action Purpose show license detail cme-srst Displays the available cme-srst license. you must purchase a license for each software feature you use past the 60 days evaluation period. (The foregoing notwithstanding.0 License Type: Evaluation License State: Active. is subject to the Cisco end user license agreement http://www. YOU MUST NOT PROCEED FURTHER IF YOU ARE NOT WILLING TO BE BOUND BY ALL THE TERMS SET FORTH HEREIN. ACCEPT? [yes/no]: yes c3945-mcqueen(config)# 000436: *Jan 28 17:42:44. The above applies even if the evaluation license is not automatically terminated and you do not receive any notice of the expiration of the evaluation period.) Activation of the software command line interface will be evidence of your acceptance of this agreement. Your use of the product. so that if you enable a software feature on 1000 devices. Example: Router# show license detail cme-srs Step 6 write mem Saves configuration. It is your responsibility to determine when the evaluation period is complete and you are required to make payment to Cisco for your use of the product feature beyond the evaluation period. Use of this product feature requires an additional license from Cisco.com/en/US/docs/general/warranty/English/EU1KEN_. INSTALLING THE LICENSE OR LICENSE KEY PROVIDED FOR ANY CISCO PRODUCT FEATURE OR USING SUCH PRODUCT FEATURE CONSTITUTES YOUR FULL ACCEPTANCE OF THE FOLLOWING TERMS. together with an additional payment. including during the 60 day evaluation period.html If you use the product feature beyond the 60 day evaluation period. EULA should be in ACCEPTED state.625: %LICENSE-6-EULA_ACCEPT_ALL: The Right to Use End User License Agreement is accepted c3945-mcqueen#show license detail cme-srst Feature: cme-srst Period left: 621 weeks 5 days Index: 1 Feature: cme-srst Version: 1. your use of the product feature will be governed solely by the Cisco end user license agreement (link above). you must purchase 1000 licenses for use past the 60 day evaluation period. Your acceptance of this agreement for the software features on one product shall be deemed your acceptance with respect to all such software on all Cisco products you purchase which includes the same software. you must submit the appropriate payment to Cisco for the license. After the 60 day evaluation period. without payment to Cisco.cisco. together with any supplements relating to such product feature. for 60 days. Example: Router# write mem Example c3945-mcqueen(config)#license accept end user agreement PLEASE READ THE FOLLOWING TERMS CAREFULLY. In Use Evaluation total period: 208 weeks 2 days Evaluation period left: 205 weeks 1 day Software Activation on Cisco Integrated Services Routers and Cisco Integrated Service Routers Generation 2 OL-20697-03 17 .

Follow the steps detailed in this section to activate an Evaluation Right to Use license. perform the steps detailed in this section. license boot module module-name technology-package package-name 4. exit 5.1(4)M. 15. 15. 15. To activate an evaluation license in the Cisco 3900 series. 2900 series.1(3)T2.0(1)M6. Evaluation licenses are activated using the license boot module module-name technology-package package-name command. configure terminal 3. and 15. reload Software Activation on Cisco Integrated Services Routers and Cisco Integrated Service Routers Generation 2 18 OL-20697-03 . Evaluation Right to Use licenses automatically become Right to Use licenses after the initial evaluation period. and 1900 series routers.0 License Type: Evaluation License State: Inactive Evaluation total period: 208 weeks 2 days Evaluation period left: 208 weeks 2 days License Count: 5000/0/0 (Active/In-use/Violation) License Priority: Low Store Index: 21 Store Name: Evaluation License Storage c3945-mcqueen# Activating an Evaluation License Note Starting with Cisco IOS Releases 15.1(1)T4.0 License Type: Evaluation License State: Inactive Evaluation total period: 208 weeks 2 days Evaluation period left: 208 weeks 2 days License Count: 5000/0/0 (Active/In-use/Violation) License Priority: Low Store Index: 22 Store Name: Evaluation License Storage Index: 3 Feature: cme-srst Version: 1. enable 2. Evaluation licenses are replaced with Evaluation Right To Use licenses. SUMMARY STEPS 1.Software Activation on Cisco Integrated Services Routers and Cisco Integrated Service Routers Generation 2 Options for Getting and Managing Software Licenses Expiry date: Jan 04 2015 16:11:17 License Count: 5000/20/0 (Active/In-use/Violation) License Priority: Low Store Index: 23 Store Name: Evaluation License Storage Index: 2 Feature: cme-srst Version: 1.1(2)T4.

You hereby acknowledge and agree that the product feature license is terminable and that the product feature enabled by such license may be shut down or terminated by Cisco after expiration of the Software Activation on Cisco Integrated Services Routers and Cisco Integrated Service Routers Generation 2 OL-20697-03 19 .com/en/US/docs/routers/access/sw_activation/eval_license_demo/eval_license_2_ demo.cisco.swf. Example: Router#reload Screencast The following screencast shows how to activate an evaluation license: http://www. Example: Router>enable Step 2 configure terminal Enters global configuration mode. • Enter your password if prompted. Use the ? command with the module command to see the module name for your router.Software Activation on Cisco Integrated Services Routers and Cisco Integrated Service Routers Generation 2 Options for Getting and Managing Software Licenses DETAILED STEPS Step 1 Command or Action Purpose enable Enables privileged EXEC mode. A reload is required to activate the software package. Example: Router#configure terminal Step 3 license boot module module-name technology-package package-name Example: Router(config)#license boot module c3900 technology-package securityk9 Step 4 exit Enables the evaluation license. and with the technology-package command to see the software packages and features supported on your router. Example: Router(config)#exit Step 5 reload Reloads the router. Example The following example shows how to activate an evaluation license: Router> enable Router# configure terminal Router(config)# license boot module c3900 technology-package data PLEASE READ THE FOLLOWING TERMS CAREFULLY. Exits global configuration mode. INSTALLING THE LICENSE OR LICENSE KEY PROVIDED FOR ANY CISCO PRODUCT FEATURE OR USING SUCH PRODUCT FEATURE CONSTITUTES YOUR FULL ACCEPTANCE OF THE FOLLOWING TERMS. YOU MUST NOT PROCEED FURTHER IF YOU ARE NOT WILLING TO BE BOUND BY ALL THE TERMS SET FORTH HEREIN.

Processor board ID FHH1226P01E 3 Gigabit Ethernet interfaces 4 Serial(sync/async) interfaces 2 ISDN Basic Rate interfaces 1 ATM interface 25 terminal lines 1 Virtual Private Network (VPN) Module DRAM configuration is 72 bits wide with parity enabled. Compiled Mon 15-Jun-09 15:27 by pallavik ROM: System Bootstrap. Cisco reserves the right to terminate or shut down any such product feature electronically or by any other means available. it is your sole responsibility to monitor your terminable usage of any product feature enabled by the license and to ensure that your systems and networks are prepared for the shut down of the product feature. export. 30-day trial period).6)PI11k PI11 ENGINEERING WEEKLY BUILD.0) with 2025472K/71680K bytes of memory. 2000880K bytes of ATA System CompactFlash 0 (Read/Write) Software Activation on Cisco Integrated Services Routers and Cisco Integrated Service Routers Generation 2 20 OL-20697-03 . UDI=C3900-SPE150/K9:FHH12250057. synced to V124_24_6_T9 Copyright (c) 1986-2009 by Cisco Systems. Cisco C3945 (revision 1.4(24. distributors and users are responsible for compliance with U. and local laws. Delivery of Cisco cryptographic products does not imply third-party authority to import.6.com. A summary of U. You acknowledge and agree that Cisco will not have any liability whatsoever for any damages. indirect.PI11k" This product contains cryptographic features and is subject to United States and local country laws governing import. exporters. return this product immediately. RELEASE SOFTWARE (fc1) Router uptime is 1 day.Software Activation on Cisco Integrated Services Routers and Cisco Integrated Service Routers Generation 2 Options for Getting and Managing Software Licenses applicable term of the license (e. 53 minutes System returned to ROM by power-on System image file is "flash0:c3900-universalk9-mz.SSA. direct. Inc. While alerts or such messages may be provided.0(1r)M.g. special. 255K bytes of non-volatile configuration memory.S.com/wwl/export/crypto/tool/stqrg.cisco. and local country laws.html If you require further assistance please contact us by sending email to export@cisco. Importers.391: %IOS_LICENSE_IMAGE_APPLICATION-6-LICENSE_LEVEL: Module name = c3900 Next reboot level = securityk9 and License = securityk9 *Jul 7 00:38:56. Version 12.S.. distribute or use encryption. ACCEPT? [yes/no]: yes % use 'write' command to make license boot config take effect on next boot Router(config)# *Jul 7 00:38:56.S.124-24. or consequential damages related to any product feature being shutdown or terminated. If you are unable to comply with U. Version 15. StoreIndex=1:Evaluation License Storage Router(config)# exit Router# reload Router# show version Cisco IOS Software. including. laws governing Cisco cryptographic products may be found at: http://www.987: %LICENSE-6-EULA_ACCEPTED: EULA for feature securityk9 1. but not limited to. By using this product you agree to comply with applicable laws and regulations.0 has been accepted. export. 3 hours. transfer and use. By clicking the "accept" button or typing "yes" you are indicating you have read and agree to be bound by all the terms provided herein. C3900 Software (C3900-UNIVERSALK9-M).

Example: Router#configure terminal Software Activation on Cisco Integrated Services Routers and Cisco Integrated Service Routers Generation 2 OL-20697-03 21 . perform the steps detailed in this section. enable 2. configure terminal 3. license feature MEM-1900-256U512MB 4. Evaluation licenses are activated using the license feature MEM-1900-256U512MB command. exit 5.Software Activation on Cisco Integrated Services Routers and Cisco Integrated Service Routers Generation 2 Options for Getting and Managing Software Licenses License Info: License UDI: ------------------------------------------------Device# PID SN ------------------------------------------------*0 C3900-SPE150/K9 FHH12250057 Technology Package License Information for Module:'c3900' ---------------------------------------------------------------Technology Technology-package Technology-package Current Type Next reboot ----------------------------------------------------------------ipbase ipbasek9 Permanent ipbasek9 security securityk9 Evaluation securityk9 uc ucK9 Permanent uck9 data None None None Configuration register is 0x0 Activating a Memory Evaluation License To activate a memory evaluation license in the Cisco 1905 router. Example: Router>enable Step 2 configure terminal Enters global configuration mode. reload DETAILED STEPS Step 1 Command or Action Purpose enable Enables privileged EXEC mode. SUMMARY STEPS 1. • Enter your password if prompted.

YOU MUST NOT PROCEED FURTHER IF YOU ARE NOT WILLING TO BE BOUND BY ALL THE TERMS SET FORTH HEREIN. but not limited to. or consequential damages related to any product feature being shutdown or terminated. including. direct. Example: Use the ? command with the license feature command to see the memory evaluation license name available for your router.. A reload is required to activate the memory license feature. Router(config)#license feature MEM-1900-256U512MB Step 4 exit Exits global configuration mode. INSTALLING THE LICENSE OR LICENSE KEY PROVIDED FOR ANY CISCO PRODUCT FEATURE OR USING SUCH PRODUCT FEATURE CONSTITUTES YOUR FULL ACCEPTANCE OF THE FOLLOWING TERMS.cisco. You hereby acknowledge and agree that the product feature license is terminable and that the product feature enabled by such license may be shut down or terminated by Cisco after expiration of the applicable term of the license (e.Software Activation on Cisco Integrated Services Routers and Cisco Integrated Service Routers Generation 2 Options for Getting and Managing Software Licenses Step 3 Command or Action Purpose license feature MEM-1900-256U512MB Enables the MEM-1900-256U512MB evaluation license. Example The following example shows how to activate an evaluation license: Router(config)# license feature MEM-1900-256U512MB Feature Name:MEM-1900-256U512MB PLEASE READ THE FOLLOWING TERMS CAREFULLY. You acknowledge and agree that Cisco will not have any liability whatsoever for any damages.com/en/US/docs/routers/access/sw_activation/eval_license_demo/eval_license_2_ demo. While alerts or such messages may be provided. Example: Router#reload Screencast The following screencast shows how to activate an evaluation license: http://www. special. indirect. ACCEPT? [yes/no]: yes Router(config)# Software Activation on Cisco Integrated Services Routers and Cisco Integrated Service Routers Generation 2 22 OL-20697-03 .g. Cisco reserves the right to terminate or shut down any such product feature electronically or by any other means available. Example: Router(config)#exit Step 5 reload Reloads the router. By clicking the "accept" button or typing "yes" you are indicating you have read and agree to be bound by all the terms provided herein.swf. it is your sole responsibility to monitor your terminable usage of any product feature enabled by the license and to ensure that your systems and networks are prepared for the shut down of the product feature. 30-day trial period).

254. SUMMARY STEPS 1.255. StoreIndex=0:Primary License Storage Activating an SNA Switching Feature License Note An SNASw feature license must be activated to configure SNASw.255.. The SNASw feature license is activated using the license feature snasw command.891: %XFR_EXT_MEMORY_LICENSING-6-LICENSE_NOT_ACTIVATED: License MEM-1900-256U512MB will take effect af reboot. To activate an evaluation or permanent license for the SNA Switching (SNASw) feature.254. show license feature Software Activation on Cisco Integrated Services Routers and Cisco Integrated Service Routers Generation 2 OL-20697-03 23 . UDI=CISCO1921/K9:FCW1345000B.Feature:MEM-1900-256U512MB.. StoreIndex=3:Evaluation License Storage Router# license install tftp://223.779: %LICENSE-6-EULA_ACCEPTED: EULA for feature MEM-1900-256U512MB 1.0 has been accepted.lic Installing licenses from "tftp://223. *Nov 19 00:14:48.254/FCW1345000B_20091118190946245. enable 2.254.1171 bytes] Installing.. perform the steps detailed in this section.0 was installed in this device.254/FCW1345000B_20091118190946245.603: %XFR_EXT_MEMORY_LICENSING-6-LICENSE_NOT_ACTIVATED: License MEM-1900-256U512MB will take effect after the system reboot.Successful:Supported 1/1 licenses were successfully installed 0/1 licenses were existing licenses 0/1 licenses were failed to install Router# *Nov 19 00:14:48. *Nov 17 23:48:19.607: %LICENSE-6-INSTALL: Feature MEM-1900-256U512MB 1. exit 5. license feature snasw 4. configure terminal 3.254 (via GigabitEthernet0/0): ! [OK .Software Activation on Cisco Integrated Services Routers and Cisco Integrated Service Routers Generation 2 Options for Getting and Managing Software Licenses *Nov 17 23:48:18.lic from 223. UDI=CISCO1920B..255.lic" Loading colbywen/FCW1345000B_20091118190946245.

Software Activation on Cisco Integrated Services Routers and Cisco Integrated Service Routers Generation 2 Options for Getting and Managing Software Licenses DETAILED STEPS Step 1 Command or Action Purpose enable Enables privileged EXEC mode. Software Activation on Cisco Integrated Services Routers and Cisco Integrated Service Routers Generation 2 24 OL-20697-03 . Example: Router#configure terminal Step 3 license feature snasw Enables the SNASw feature license. • Enter your password if prompted. Example: Router(config)#license feature snasw Step 4 exit Exits global configuration mode. Example: Router#show license feature Example The following example shows how to activate an SNASw feature license: Router> enable Router# configure terminal Router(config)# license feature snasw Router(config)# exit Router# show license feature Feature name Enforcement ipbasek9 no securityk9 yes uck9 yes datak9 yes gatekeeper yes LI yes SSL_VPN yes ios-ips-update yes SNASw yes Evaluation no yes yes yes yes no yes yes yes Subscription no no no no no no no yes no Enabled yes yes yes no no no no no yes RightToUse no yes yes yes yes no yes yes yes Activating the IPS Feature License See the Cisco Services for IPS on IOS document on Cisco. Example: Router(config)#exit Step 5 show license feature Verifies that the feature license has been activated.com for information on configuring an IPS feature license. Example: Router>enable Step 2 configure terminal Enters global configuration mode.

Configuring the hseck9 Feature License Activating the hseck9 Feature License No action is required to activate the hseck9 feature license.Software Activation on Cisco Integrated Services Routers and Cisco Integrated Service Routers Generation 2 Options for Getting and Managing Software Licenses Activating the SSL_VPN Feature License See the SSL VPN document on Cisco. license clear feature-name 7. no license feature hseck9 4. Activating the Gatekeeper Feature License See the Configuring Cisco Unified Border Element with Gatekeeper document on Cisco.com for information on configuring the SSLVPN feature license. exit 5. Example: Router#configure terminal Step 3 no license feature hseck9 Disables the hseck9 feature license. • Enter your password if prompted. configure terminal 3. perform the steps detailed in this section.com for information on configuring the Gatekeeper feature license. Clearing an Active hseck9 Feature License To clear an active hseck9 feature license. enable 2. show license detail DETAILED STEPS Step 1 Command or Action Purpose enable Enables privileged EXEC mode. Example: Router>enable Step 2 configure terminal Enters global configuration mode. SUMMARY STEPS 1. reload 6. The hseck9 feature license is active after installation. Example: Router(config)#no license feature hseck9 Software Activation on Cisco Integrated Services Routers and Cisco Integrated Service Routers Generation 2 OL-20697-03 25 .

Example: Router#show license detail Example The following example shows how to clear an active license: Router> enable Router# configure terminal Enter configuration commands. Verifies that the license has been cleared. and 1900 series routers. the hseck9 feature license can be reactivated using the license feature hseck9 command. Clear the License Software Activation on Cisco Integrated Services Routers and Cisco Integrated Service Routers Generation 2 26 OL-20697-03 . Router(config)# no license feature hseck9 % use 'write' command to disable 'hseck9' license on next boot Router(config)# exit Router# reload Router# license clear hseck9 Clearing an Active Permanent Technology Package License To clear an active permanent license from the Cisco 3900 series. Disable the Technology Package 2. perform the following tasks: 1.Software Activation on Cisco Integrated Services Routers and Cisco Integrated Service Routers Generation 2 Options for Getting and Managing Software Licenses Step 4 Command or Action Purpose exit Exits global configuration mode. Example: Router#reload Step 6 license clear feature-name Clear the feature license from license storage. Note Example: Router#license clear hseck9 Step 7 show license detail If you do not clear the hseck9 feature license after disabling it. one per line. End with CNTL/Z. A reload is required to disable the feature. A reload is not required to activate an hseck9 feature license. 2900 series. Example: Router(config)#exit Step 5 reload Reloads the image.

license boot module module-name technology-package package-name disable 4. configure terminal 3. Example: Router(config)#license boot module c3900 technology-package uck9 disable Step 4 exit Exits global configuration mode. enable 2. exit 5. perform the steps detailed in this section. show version DETAILED STEPS Step 1 Command or Action Purpose enable Enables privileged EXEC mode • Enter your password if prompted. Router#reload Step 6 show version Verifies that the technology package has been disabled. Example: Router>enable Step 2 configure terminal Enters global configuration mode. Example: Router#configure terminal Step 3 license boot module module-name technology-package package-name disable Disables the active license. Example: Router(config)#exit Step 5 reload Reloads the image. SUMMARY STEPS 1. reload 6.Software Activation on Cisco Integrated Services Routers and Cisco Integrated Service Routers Generation 2 Options for Getting and Managing Software Licenses Disable the Technology Package To disable a license. Example: Router#show version Software Activation on Cisco Integrated Services Routers and Cisco Integrated Service Routers Generation 2 OL-20697-03 27 . Example: A reload is required to make the software package inactive.

show version DETAILED STEPS Step 1 Command or Action Purpose license clear feature-name Clears the technology package license from license storage. Example: Router(config)#no license boot module c3900 technology uck9 disable Step 4 exit Exits global configuration mode. perform the steps detailed in this section. no license boot module technology module-name technology-package package-name disable 4. SUMMARY STEPS 1. Example: Router#configure terminal Step 3 no license boot module module-name technology-package Clears the license boot module module-name package-name disable technology-package package-name disable command used for disabling the active license. Example: Router#show version Software Activation on Cisco Integrated Services Routers and Cisco Integrated Service Routers Generation 2 28 OL-20697-03 . reload 6. Example: Router#reload Step 6 show version Verifies that the license has been cleared.Software Activation on Cisco Integrated Services Routers and Cisco Integrated Service Routers Generation 2 Options for Getting and Managing Software Licenses Clear the License To clear the license. Example: Router#license clear uck9 Step 2 configure terminal Enters global configuration mode. exit 5. configure terminal 3. license clear feature-name 2. Example: Router(config)#exit Step 5 reload Reloads the image.

cisco.com. If you are unable to comply with U. laws governing Cisco cryptographic products may be found at: http://www. distribute or use encryption. export. return this product immediately.6)PI11k PI11 ENGINEERING WEEKLY BUILD. End with CNTL/Z.0) with 2025472K/71680K bytes of memory. Router(config)# license boot module c3900 technology-package ? datak9 data technology securityk9 security technology uck9 unified communications technology Router(config)# license boot module c3900 technology-package uck9 disable % use 'write' command to make license boot config take effect on next boot Router(config)# exit Router# reload Router# show version Cisco IOS Software. and local country laws. Version 12. Delivery of Cisco cryptographic products does not imply third-party authority to import. transfer and use.124-24. Version 15. Importers. export. exporters.Software Activation on Cisco Integrated Services Routers and Cisco Integrated Service Routers Generation 2 Options for Getting and Managing Software Licenses Example The following example shows how to clear an active license: Router> enable Router# configure terminal Enter configuration commands.com/wwl/export/crypto/tool/stqrg.4(24.6. 3 hours.S. 53 minutes System returned to ROM by power-on System image file is "flash0:c3900-universalk9-mz.html If you require further assistance please contact us by sending email to export@cisco. Cisco C3945 (revision 1. A summary of U.S.SSA.PI11k" This product contains cryptographic features and is subject to United States and local country laws governing import. one per line. and local laws. 2000880K bytes of ATA System CompactFlash 0 (Read/Write) License Info: License UDI: Software Activation on Cisco Integrated Services Routers and Cisco Integrated Service Routers Generation 2 OL-20697-03 29 .S. distributors and users are responsible for compliance with U. RELEASE SOFTWARE (fc1) upt-3945-1 uptime is 1 day. C3900 Software (C3900-UNIVERSALK9-M). Compiled Mon 15-Jun-09 15:27 by pallavik ROM: System Bootstrap. By using this product you agree to comply with applicable laws and regulations. 255K bytes of non-volatile configuration memory. Processor board ID FHH1226P01E 3 Gigabit Ethernet interfaces 4 Serial(sync/async) interfaces 2 ISDN Basic Rate interfaces 1 ATM interface 25 terminal lines 1 Virtual Private Network (VPN) Module DRAM configuration is 72 bits wide with parity enabled. Inc.0(1r)M. synced to V124_24_6_T9 Copyright (c) 1986-2009 by Cisco Systems.

691: %SYS-5-CONFIG_I: Configured from console by consoleclear uck9 Feature: uck9 1 License Type: Permanent License State: Active. Compiled Mon 15-Jun-09 15:27 by pallavik ROM: System Bootstrap. and local laws. Importers.S. RELEASE SOFTWARE (fc1) upt-3945-1 uptime is 1 minute System returned to ROM by reload at 00:41:07 UTC Tue Jul 7 2009 System image file is "flash:c3900-universalk9-mz.Software Activation on Cisco Integrated Services Routers and Cisco Integrated Service Routers Generation 2 Options for Getting and Managing Software Licenses ------------------------------------------------Device# PID SN ------------------------------------------------*0 C3900-SPE150/K9 FHH12250057 Technology Package License Information for Module:'c3900' ---------------------------------------------------------------Technology Technology-package Technology-package Current Type Next reboot ----------------------------------------------------------------ipbase ipbasek9 Permanent ipbasek9 security securityk9 RightToUse securityk9 uc disable Permanent disable data None None None Configuration register is 0x0 Router# Router# license clear uck9 *Jul 7 00:34:23. synced to V124_24_6_T9 Copyright (c) 1986-2009 by Cisco Systems. StoreIndex=15:Primary License Storage Router# Router# configure terminal Router(config)# no license boot module c3900 technology uck9 disable Router(config)# exit Router# reload Router# show version Cisco IOS Software.4(24. Software Activation on Cisco Integrated Services Routers and Cisco Integrated Service Routers Generation 2 30 OL-20697-03 .6)PI11k PI11 ENGINEERING WEEKLY BUILD.S. export. C3900 Software (C3900-UNIVERSALK9-M).6.SSA. transfer and use. Version 15.223: %LICENSE-6-REMOVE: Feature uck9 1. exporters. Not in Use License Addition: Exclusive License Count: Non-Counted Comment: Store Index: 15 Store Name: Primary License Storage Are you sure you want to clear? (yes/[no]): yes upt-3945-1# *Jul 7 00:34:31. return this product immediately.124-24. distribute or use encryption. By using this product you agree to comply with applicable laws and regulations. If you are unable to comply with U. distributors and users are responsible for compliance with U. Version 12. Delivery of Cisco cryptographic products does not imply third-party authority to import.0(1r)M. UDI=C3900-SPE150/K9:FHH12250057. Inc.0 was removed from this device. and local country laws. export.PI11k" Last reload reason: Reload Command This product contains cryptographic features and is subject to United States and local country laws governing import.

Cisco C3945 (revision 1. 2000880K bytes of ATA System CompactFlash 0 (Read/Write) License Info: License UDI: ------------------------------------------------Device# PID SN ------------------------------------------------*0 C3900-SPE150/K9 FHH12250057 Technology Package License Information for Module:'c3900' ---------------------------------------------------------------Technology Technology-package Technology-package Current Type Next reboot ----------------------------------------------------------------ipbase ipbasek9 Permanent ipbasek9 security securityk9 RightToUse securityk9 uc disable None None data None None None Configuration register is 0x0 Router# Configuring the EULA Use the license accept end user agreement command in global configuration mode to configure a one-time acceptance of the EULA for all Cisco IOS software packages and features. 255K bytes of non-volatile configuration memory.Software Activation on Cisco Integrated Services Routers and Cisco Integrated Service Routers Generation 2 Options for Getting and Managing Software Licenses A summary of U. YOU MUST NOT PROCEED FURTHER IF YOU ARE NOT WILLING TO BE BOUND BY ALL THE TERMS SET FORTH HEREIN. You may use this product feature Software Activation on Cisco Integrated Services Routers and Cisco Integrated Service Routers Generation 2 OL-20697-03 31 . together with an additional payment.S. After the command is issued and the EULA accepted.cisco.html If you require further assistance please contact us by sending email to export@cisco. the EULA is not displayed and the user is not prompted to accept the EULA. The following example shows how to configure a one-time acceptance of the EULA: Router(config)#license accept end user agreement PLEASE READ THE FOLLOWING TERMS CAREFULLY. INSTALLING THE LICENSE OR LICENSE KEY PROVIDED FOR ANY CISCO PRODUCT FEATURE OR USING SUCH PRODUCT FEATURE CONSTITUTES YOUR FULL ACCEPTANCE OF THE FOLLOWING TERMS.com. Processor board ID FHH1226P01E 3 Gigabit Ethernet interfaces 4 Serial(sync/async) interfaces 2 ISDN Basic Rate interfaces 25 terminal lines 1 Virtual Private Network (VPN) Module DRAM configuration is 72 bits wide with parity enabled.0) with 2025472K/71680K bytes of memory. laws governing Cisco cryptographic products may be found at: http://www. Use of this product feature requires an additional license from Cisco.com/wwl/export/crypto/tool/stqrg. the EULA is automatically applied to all Cisco IOS software licenses.

so that if you enable a software feature on 1000 devices. The following example shows the output for the show license command: Router# show license Index 1 Feature: ipbasek9 Index 2 Feature: securityk9 Period left: 8 weeks 4 days Period Used: 0 minute 0 second License Type: EvalRightToUse License State: Active.html If you use the product feature beyond the 60 day evaluation period. It is your responsibility to determine when the evaluation period is complete and you are required to make payment to Cisco for your use of the product feature beyond the evaluation period. like displaying and verifying licenses • Software activation processes. you must purchase a license for each software feature you use past the 60 days evaluation period.626: %LICENSE-6-EULA_ACCEPT_ALL: The Right to Use End User License Agreement is accepted Router(config)# Router(config)# end Router# Verifying Licenses and Other Licensing Tasks See the Cisco IOS Software Activation Tasks and Commands chapter of Cisco IOS Software Activation Configuration Guide for information about the following topics and more: • Software activation tasks. (The foregoing notwithstanding. together with any supplements relating to such product feature. After the 60 day evaluation period. you must submit the appropriate payment to Cisco for the license.cisco.Software Activation on Cisco Integrated Services Routers and Cisco Integrated Service Routers Generation 2 Options for Getting and Managing Software Licenses on an evaluation basis. your use of the product feature will be governed solely by the Cisco end user license agreement (link above).) Activation of the software command line interface will be evidence of your acceptance of this agreement. In Use License Count: Non-Counted License Priority: Low Index 3 Feature: uck9 Period left: Not Activated Period Used: 0 minute 0 second License Type: EvalRightToUse License State: Not in Use. without payment to Cisco. like rehosting and RMA Use the show license.com/en/US/docs/general/warranty/English/EU1KEN_. including during the 60 day evaluation period. is subject to the Cisco end user license agreement http://www. show license all. you must purchase 1000 licenses for use past the 60 day evaluation period. for 60 days. The above applies even if the evaluation license is not automatically terminated and you do not receive any notice of the expiration of the evaluation period. ACCEPT? [yes/no]: yes Router(config)# *Oct 25 22:05:27. EULA not accepted Software Activation on Cisco Integrated Services Routers and Cisco Integrated Service Routers Generation 2 32 OL-20697-03 . Your acceptance of this agreement for the software features on one product shall be deemed your acceptance with respect to all such software on all Cisco products you purchase which includes the same software. and show license detail commands in privileged EXEC mode to see information about all Cisco IOS software licenses. Your use of the product.

EULA not accepted License Count: 0/0 (In-use/Violation) License Priority: None 8 Feature: ios-ips-update Period left: Not Activated Period Used: 0 minute 0 second License Type: EvalRightToUse License State: Not in Use. EULA not accepted License Count: Non-Counted License Priority: None 5 Feature: gatekeeper Period left: Not Activated Period Used: 0 minute 0 second License Type: EvalRightToUse License State: Not in Use. EULA not accepted License Count: Non-Counted License Priority: None 6 Feature: LI 7 Feature: SSL_VPN Period left: Not Activated Period Used: 0 minute 0 second License Type: EvalRightToUse License State: Not in Use. EULA not accepted License Count: Non-Counted License Priority: None 9 Feature: SNASw Period left: Not Activated Period Used: 0 minute 0 second License Type: EvalRightToUse License State: Not in Use. EULA not accepted License Count: Non-Counted License Priority: None 10 Feature: hseck9 11 Feature: cme-srst Period left: Not Activated Period Used: 0 minute 0 second License Type: EvalRightToUse License State: Not in Use.Software Activation on Cisco Integrated Services Routers and Cisco Integrated Service Routers Generation 2 Options for Getting and Managing Software Licenses Index Index Index Index Index Index Index Index Index Index License Count: Non-Counted License Priority: None 4 Feature: datak9 Period left: Not Activated Period Used: 0 minute 0 second License Type: EvalRightToUse License State: Not in Use. EULA not accepted License Count: Non-Counted License Priority: None Router# Software Activation on Cisco Integrated Services Routers and Cisco Integrated Service Routers Generation 2 OL-20697-03 33 . EULA not accepted License Count: Non-Counted License Priority: None 13 Feature: UCVideo Period left: Not Activated Period Used: 0 minute 0 second License Type: EvalRightToUse License State: Not in Use. EULA not accepted License Count: 0/0 (In-use/Violation) License Priority: None 12 Feature: WAAS_Express Period left: Not Activated Period Used: 0 minute 0 second License Type: EvalRightToUse License State: Not in Use.

Software Activation on Cisco Integrated Services Routers and Cisco Integrated Service Routers Generation 2 Options for Getting and Managing Software Licenses The following sample output is from the show license detail command for the first 60 days (RTU evaluation period): Router# show license detail datak9 Index: 1 Feature: datak9 Version: 1. EULA not accepted Software Activation on Cisco Integrated Services Routers and Cisco Integrated Service Routers Generation 2 34 OL-20697-03 .0 License Type: EvalRightToUse License State: Active.0 The following sample output is from the show license detail command: Router# show license all License Store: Primary License Storage License Store: Built-In License Storage StoreIndex: 0 Feature: security9k Version: 1. In Use Evaluation total period: 8 weeks 4 days Evaluation period left: 8 weeks 3 days Period Used: 19 minutes 25 seconds Transition date: Jul 02 2011 18:36:01 Lock type: Non Node locked Vendor info: <UDI><PID>NOTLOCKED</PID><SN>NOTLOCKED</SN></UDI><T>RTU</T> License Addition: Additive License Generation version: 0x8200000 License Count: Non-Counted License Priority: Low StoreIndex: 1 Feature: uck9 Version: 1. EULA not accepted Evaluation total period: 8 weeks 4 days Evaluation period left: 8 weeks 4 days Period Used: 0 minute 0 second Lock type: Non Node locked Vendor info: <UDI><PID>NOTLOCKED</PID><SN>NOTLOCKED</SN></UDI><T>RTU</T> License Addition: Additive License Generation version: 0x8200000 License Count: Non-Counted License Priority: None StoreIndex: 2 Feature: datak9 Version: 1. In Use License Count: Non-Counted License Priority: Low Store Index: 2 Store Name: Built-in License Storage Version: 1.0 License Type: EvalRightToUse License State: Not in Use.0 License Type: EvalRightToUse License State: Not in Use.0 License Type: EvalRightToUse License State: Active. In Use Evaluation total period: 8 weeks 0 days Evaluation period left: 7 weeks 2 days Period Used: 2 days Expiry date: Dec 01 2014 06:31:36 Lock type: Non Node locked Vendor info: License Addition: Additive License Generation version: 0x8100000 License Count: Non-Counted License Priority: Low Store Index: 8 Store Name: Built-in License Storage The following sample output is from the show license detail command after the RTU evaluation period: Router# show license detail datak9 Index: 1 Feature: datak9 License Type: RightToUse License State: Active.

0 License Type: EvalRightToUse License State: Not in Use.0 License Type: EvalRightToUse License State: Not in Use. EULA not accepted Evaluation total period: 8 weeks 4 days Evaluation period left: 8 weeks 4 days Period Used: 0 minute 0 second Lock type: Non Node locked Software Activation on Cisco Integrated Services Routers and Cisco Integrated Service Routers Generation 2 OL-20697-03 35 .0 License Type: EvalRightToUse License State: Not in Use. EULA not accepted Evaluation total period: 8 weeks 4 days Evaluation period left: 8 weeks 4 days Period Used: 0 minute 0 second Lock type: Non Node locked Vendor info: <UDI><PID>NOTLOCKED</PID><SN>NOTLOCKED</SN></UDI><T>RTU</T> License Addition: Additive License Generation version: 0x8200000 License Count: 0/0 (In-use/Violation) License Priority: None StoreIndex: 5 Feature: ios-ips-update Version: 1.Software Activation on Cisco Integrated Services Routers and Cisco Integrated Service Routers Generation 2 Options for Getting and Managing Software Licenses Evaluation total period: 8 weeks 4 days Evaluation period left: 8 weeks 4 days Period Used: 0 minute 0 second Lock type: Non Node locked Vendor info: <UDI><PID>NOTLOCKED</PID><SN>NOTLOCKED</SN></UDI><T>RTU</T> License Addition: Additive License Generation version: 0x8200000 License Count: Non-Counted License Priority: None StoreIndex: 3 Feature: gatekeeper Version: 1. EULA not accepted Evaluation total period: 8 weeks 4 days Evaluation period left: 8 weeks 4 days Period Used: 0 minute 0 second Lock type: Non Node locked Vendor info: <UDI><PID>NOTLOCKED</PID><SN>NOTLOCKED</SN></UDI><T>RTU</T> License Addition: Additive License Generation version: 0x8200000 License Count: Non-Counted License Priority: None StoreIndex: 4 Feature: SSL_VPN Version: 1.0 License Type: EvalRightToUse License State: Not in Use. EULA not accepted Evaluation total period: 8 weeks 4 days Evaluation period left: 8 weeks 4 days Period Used: 0 minute 0 second Lock type: Non Node locked Vendor info: <UDI><PID>NOTLOCKED</PID><SN>NOTLOCKED</SN></UDI><T>RTU</T> License Addition: Additive License Generation version: 0x8200000 License Count: Non-Counted License Priority: None StoreIndex: 6 Feature: SNASw Version: 1.0 License Type: EvalRightToUse License State: Not in Use. EULA not accepted Evaluation total period: 8 weeks 4 days Evaluation period left: 8 weeks 4 days Period Used: 0 minute 0 second Lock type: Non Node locked Vendor info: <UDI><PID>NOTLOCKED</PID><SN>NOTLOCKED</SN></UDI><T>RTU</T> License Addition: Additive License Generation version: 0x8200000 License Count: Non-Counted License Priority: None StoreIndex: 7 Feature: cme-srst Version: 1.

0 License Type: EvalRightToUse License State: Not in Use. Note Permanent licenses are not affected by any IOS release upgrade. This section contains the following topics: • RTU Releases. page 41 Software Activation on Cisco Integrated Services Routers and Cisco Integrated Service Routers Generation 2 36 OL-20697-03 . in that they are built into the IOS image and avoid the overhead of license installation.0 License Type: EvalRightToUse License State: Not in Use. page 37 • Global EULA Acceptance.Software Activation on Cisco Integrated Services Routers and Cisco Integrated Service Routers Generation 2 Options for Getting and Managing Software Licenses Vendor info: <UDI><PID>NOTLOCKED</PID><SN>NOTLOCKED</SN></UDI><T>RTU</T> License Addition: Additive License Generation version: 0x8200000 License Count: 0/0 (In-use/Violation) License Priority: None StoreIndex: 8 Feature: WAAS_Express Version: 1. page 38 • RTU Migration Paths. The initial version of RTU release (Existing RTU) contains built-in evaluation licenses valid for 12 years and Lifetime RTU licenses that are similar to permanent licenses. EULA not accepted Evaluation total period: 8 weeks 4 days Evaluation period left: 8 weeks 4 days Period Used: 0 minute 0 second Lock type: Non Node locked Vendor info: <UDI><PID>NOTLOCKED</PID><SN>NOTLOCKED</SN></UDI><T>RTU</T> License Addition: Additive License Generation version: 0x8200000 License Count: Non-Counted License Priority: None StoreIndex: 9 Feature: UCVideo Version: 1. EULA not accepted Evaluation total period: 8 weeks 4 days Evaluation period left: 8 weeks 4 days Period Used: 0 minute 0 second Lock type: Non Node locked Vendor info: <UDI><PID>NOTLOCKED</PID><SN>NOTLOCKED</SN></UDI><T>RTU</T> License Addition: Additive License Generation version: 0x8200000 License Count: Non-Counted License Priority: None RTU Migration This section describes customer scenarios with regard to migrating to Existing or Lifetime RTU release and recommends actions to take before upgrading. The first course of action is to consider what release your router is running and then follow the recommended actions if any. page 39 • Lifetime RTU (After Migration).

They should follow the recommended actions specified under Preceding RTU to Existing/Lifetime migration paths.1(4)M Such arrangement basically provided 12-year evaluation licenses and was intended to be a temporary solution until Lifetime RTU support was available.0(1)M.0(1)M3 • 15. Lifetime RTU A Lifetime RTU release license includes the following: 1.1(2)T3 • 15.0(1)M4.1(1)T2. 15. 15. 15.1(3)T1 • 15. Existing RTU Initial RTU support was provided in the Existing RTU releases listed below: • 15. These include the following releases: • 15. Initial evaluation period of 60 days 2.1(2)T1 • Any 12.Software Activation on Cisco Integrated Services Routers and Cisco Integrated Service Routers Generation 2 Options for Getting and Managing Software Licenses RTU Releases The IOS software releases to consider are categorized as follows: • Preceding RTU • Existing RTU • Lifetime RTU Preceding RTU Preceding RTU releases are customers’ running IOS releases with 60 days of evaluation licenses.4T release Customers running these releases with evaluation licenses and planning to upgrade to Existing or Lifetime RTU releases are affected. Transition to Lifetime RTU license without customer intervention RTU transition warning/complete Syslogs/Traps are provided 10 days and 5 days before transition and on the actual day of transition.1(1)T1 • 15.0(1)M1.0(1)M2.1(2)T4 or later Software Activation on Cisco Integrated Services Routers and Cisco Integrated Service Routers Generation 2 OL-20697-03 37 . If you are running Existing RTU releases and planning to upgrade to Lifetime RTU releases. Customers running the following Lifetime RTU releases are not impacted: • 15. please follow the recommended actions specified under Existing RTU to Lifetime RTU migration paths. This temporary RTU solution provided immediate relief for customers facing licensing-related overhead.1(2)T.1(2)T2.1(1)T. 15.0(1)M6 or later • 15. 15. 15. 15.0(1)M5 • 15.1(1)T4 or later • 15.1(3)T. 15. 15.1(1)T3 • 15.

together with any supplements relating to such product feature. [OK] Software Activation on Cisco Integrated Services Routers and Cisco Integrated Service Routers Generation 2 38 OL-20697-03 . YOU MUST NOT PROCEED FURTHER IF YOU ARE NOT WILLING TO BE BOUND BY ALL THE TERMS SET FORTH HEREIN.cisco.1(3)T2 or later • 15. you must purchase a license for each software feature you use past the 60 days evaluation period.2(1)T or later Global EULA Acceptance Customers migrating to Lifetime RTU are required to accept the global end user license agreement with the Exising RTU release.Software Activation on Cisco Integrated Services Routers and Cisco Integrated Service Routers Generation 2 Options for Getting and Managing Software Licenses • 15. After the 60 day evaluation period. Your acceptance of this agreement for the software features on one product shall be deemed your acceptance with respect to all such software on all Cisco products you purchase which includes the same software. you must submit the appropriate payment to Cisco for the license. You may use this product feature on an evaluation basis.. INSTALLING THE LICENSE OR LICENSE KEY PROVIDED FOR ANY CISCO PRODUCT FEATURE OR USING SUCH PRODUCT FEATURE CONSTITUTES YOUR FULL ACCEPTANCE OF THE FOLLOWING TERMS.html If you use the product feature beyond the 60 day evaluation period. Your use of the product. for 60 days.021: %LICENSE-6-EULA_ACCEPT_ALL: The Right to Use End User License Agreement is accepted Router# wr Building configuration. without payment to Cisco. This is because the Lifetime RTU keys have changed and EULA needs to be accepted again to ensure a smooth transition. so that if you enable a software feature on 1000 devices.. is subject to the Cisco end user license agreement http://www. Use of this product feature requires an additional license from Cisco. together with an additional payment.com/en/US/docs/general/warranty/English/EU1KEN_. including during the 60 day evaluation period. (The foregoing notwithstanding.1(4)M1 or later • 15. The above applies even if the evaluation license is not automatically terminated and you do not receive any notice of the expiration of the evaluation period. ACCEPT? [yes/no]: yes Router(config)# end Jun 14 21:39:59. It is your responsibility to determine when the evaluation period is complete and you are required to make payment to Cisco for your use of the product feature beyond the evaluation period. you must purchase 1000 licenses for use past the 60 day evaluation period.) Activation of the software command line interface will be evidence of your acceptance of this agreement. Please perform the following actions when required: Router(config)# license accept end user agreement PLEASE READ THE FOLLOWING TERMS CAREFULLY. your use of the product feature will be governed solely by the Cisco end user license agreement (link above).

1. Preceding RTU Release —> Existing/Lifetime RTU Release 2. Figure 2 Steps for RTU Migration Preceding RTU Existing RTU No Further Action Required Lifetime RTU No Further Action Required Permanent Licenses (No eval license in use) See Preceding RTU -> Existing/Lifetime RTU Migration Path Permanent Licenses (No eval license in use) Evaluaon/RTU Licenses (At least one eval/RTU license in use) See Preceding RTU -> Existing/Lifetime RTU Migration Path No Further Action Required See Existing RTU -> Lifetime RTU Migration Path 209533 Evaluaon Licenses (At least one eval license in use) Preceding RTU —> Existing/Lifetime RTU Migration Path This procedure covers customers running IOS Preceding RTU releases with evaluation licenses that have not expired and wishing to migrate to Existing or Lifetime RTU releases. A migration performed without the recommended upgrade procedure results in a loss of functionality related to features that relied on the presence of Preceding RTU license. The Existing/Lifetime RTU license keys have changed and require re-acceptance of the end user license agreement. Software Activation on Cisco Integrated Services Routers and Cisco Integrated Service Routers Generation 2 OL-20697-03 39 . Existing RTU Release —> Lifetime RTU Release Figure 2 shows the steps for migrating to Existing or Lifetime RTU.Software Activation on Cisco Integrated Services Routers and Cisco Integrated Service Routers Generation 2 Options for Getting and Managing Software Licenses RTU Migration Paths There are basically two IOS release migration paths a typical customer must take to upgrade to Existing or Lifetime RTU release.

license udi pid C3900-SPE250/K9 sn FHH1313001U license accept end user agreement Step 3 Copy the startup-config back to the Preceding RTU router. you can see that the configurations related to licenses are rejected. Software Activation on Cisco Integrated Services Routers and Cisco Integrated Service Routers Generation 2 40 OL-20697-03 . After reload. Step 6 Do not save the configuration. Router# copy tftp://<tftp_server>/<user_id>/startup-config startup-config Step 4 Do not save the configuration. The example below is for tftp a server. Note: If any other configuration is required before upgrade. Step 5 Reload the router. either Existing or Lifetime RTU release. etc. save the startup-config to a location of your choice—it could be a compact flash. this must be completed and the configuration should be saved before proceeding with this step. tftp server.Software Activation on Cisco Integrated Services Routers and Cisco Integrated Service Routers Generation 2 Options for Getting and Managing Software Licenses Figure 3 shows the migration path from Preceding RTU to Existing/Lifetime RTU releases. all the configurations are preserved. Figure 3 Preceding RTU to Existing/Lifetime RTU Migration Existing/ Lifetime RTU 209534 Preceding RTU Before upgrading. The example below is for a tftp server. with the upgrade release. The Lifetime RTU license keys have changed and require re-acceptance of the end user license agreement. with the same Existing or Lifetime RTU release. Step 7 Immediately reload again. After reload.” entry. A migration performed without the recommended upgrade procedure results in a loss of functionality related to features that relied on the presence of Existing RTU release license. without saving the configuration. Router# copy startup-config tftp://<tftp_server>/<user_id>/startup-config Step 2 Edit the startup-config and add the “license accept end user agreement” as shown below in bold right after the “license udi pid …. perform the following steps: Step 1 On the Preceding RTU router. without saving the configuration. Step 8 Verify license-related configurationss and feature functionality. Existing RTU —> Lifetime RTU Migration Path This procedure covers customers running IOS Existing RTU releases with Eval/RTU licenses and wishing to upgrade to Lifetime RTU releases.

Router# write Step 3 Upgrade to Lifetime RTU IOS Release. In Use License Count: Non-Counted License Priority: Low Software Activation on Cisco Integrated Services Routers and Cisco Integrated Service Routers Generation 2 OL-20697-03 41 .Software Activation on Cisco Integrated Services Routers and Cisco Integrated Service Routers Generation 2 Options for Getting and Managing Software Licenses Figure 4 shows the migration path from Preceding RTU to Existing/Lifetime RTU releases. Lifetime RTU (After Migration) Once you migrate to a Lifetime RTU release. the RTU license restarts from time zero. Router# show license Index 4 Feature: datak9 Period left: 8 weeks 4 days Period Used: 0 minute 0 second License Type: EvalRightToUse License State: Active. then Steps 1 and 2 can be skipped. The show CLI output displays the “EvalRightToUse” for the initial 60 days. perform the following steps: Note Step 1 If the global “license accept end user agreement” has already been performed on the Existing RTU release router. configure the global end user license agreement: Router#(config) license accept end user agreement Step 2 Save the configuration. On the Existing RTU release router. Figure 4 Existing RTU to Lifetime RTU Migration Lifetime RTU 209535 Existing RTU Before upgrading. This means that for the first 60 days. the Lifetime RTU license is considered to be in evaluation mode. An example of this output is shown below. as the license keys have changed.

while an RMA replacement router is a new router from the manufacturer. RMA License Transfer To transfer a software license from a failed device to a new device.com/en/US/docs/ios/csa/configuration/guide/15_0/csa_book. • First Part: Restoring Licenses • Second Part: Restoring Configurations Software Activation on Cisco Integrated Services Routers and Cisco Integrated Service Routers Generation 2 42 OL-20697-03 . For more information on using SNMP.html. use the SN and PID from the service performance engine (SPE) and not the chassis. In Use License Count: Non-Counted License Priority: Low Simple Network Management Protocol Software licenses can be installed and managed with network management systems using Simple Network Management Protocol (SNMP). go to the Cisco licensing portal at http://www.cisco. Syslogs and Traps are sent 10 days and 5 days before transition and on the actual day of transition to provide notice of pending/completion of license transition. This applies to RMA replacement routers received with Lifetime RTU release installed. see Cisco IOS Software Activation Configuration Guide at http://www. Note You need the UDI of the defective as well as the RMA router to initiate an RMA replacement license.cisco. Note To transfer a software license from a Cisco 3925 or Cisco 3945 ISR. Restoring Configuration Files on RMA Replacement Routers This section describes the steps for RMA replacement routers if restoration of configuration files is required.com/go/license. Note An RMA router is the router that is sent back to the manufacturer for RMA.Software Activation on Cisco Integrated Services Routers and Cisco Integrated Service Routers Generation 2 RMA License Transfer After approximately 60 days. An example of this output is shown below. Router# show license Index 4 Feature: datak9 Period left: Life time License Type: RightToUse License State: Active. the show CLI output displays “RightToUse” for the License Type. After the transition. the Lifetime RTU license transitions to “RightToUse” without any further customer intervention. Restoring configuration files on RMA replacement routers is a two-part process.

before the router was sent for RMA.Software Activation on Cisco Integrated Services Routers and Cisco Integrated Service Routers Generation 2 Software Activation on Modules First Part: Restoring Licenses Perform the following steps to bring up your RMA replacement router with the required licenses: Step 1 It is assumed that the startup-config was already saved. see the Module Support on Cisco Integrated Services Routers Generation 2 document. For information on software activation and software applications supported on a module. etc.. For additional information on RMA license transfer. Second Part: Restoring Configurations Perform the following steps to restore the configurations on your RMA replacement router: Step 1 Copy the startup-config to RMA replacement router as running config. Software Activation on Cisco Integrated Services Routers and Cisco Integrated Service Routers Generation 2 OL-20697-03 43 . This step is to bring back your configured licenses from the RMA router. The example shown below is for a tftp server: Router# copy startup-config tftp://<tftp_server>/<user_id>/startup-config Step 2 Edit the saved startup-config with any text editor of your choice. The example shown below is for a tftp server: Router# copy tftp://<tftp_server>/<user_id>/startup-config running-config Step 4 Save the configuration. license accept end user agreement Step 3 Copy the startup-config to your RMA replacement router as running config. Step 5 Reload the RMA replacement router.” line. Software Activation on Modules For information on the technology package required to support modules on the Cisco 2900 series and 3900 series ISR.. see the documentation set for the module and the software application. Note that some configurations have been thrown out. Step 3 Verify license-related configurations and feature functionality. compact flash. although the objective here is to restore the licenses only. see the Cisco Software Activation Conceptual Overview chapter in Cisco IOS Software Activation Configuration Guide. for example to a tftp server. The example shown below is for a tftp server: Router# copy tftp://<tftp_server>/<user_id>/startup-config running-config Step 2 Save the configuration. Add the “license accept end user agreement” as shown below right after the “license udi pid.. This step will restore all the configurations.

and feature sets.cisco. Cisco software releases. Software Activation on Cisco Integrated Services Routers and Cisco Integrated Service Routers Generation 2 44 OL-20697-03 . Related Documents and Links Related Topic Document Title Cisco License Manager User Guide for Cisco License Manager Cisco License Manager Online Help API Reference Guides for Cisco License Manager Software Activation using Cisco IOS CLI and Cisco Call Home Cisco IOS Software Activation Configuration Guide Feature Documents Cisco Services for IPS on IOS Cisco IOS Software Activation SSL VPN Configuring Cisco Unified Border Element with Gatekeeper Cisco Software Activation QA: Gatekeeper: A Cisco Unified Border Element Component Q&A and White paper Software Activation Q&A for Cisco 860 and 880 Integrated Services Routers Cisco’s Integrated Services Routers Generation Two Licensing and Packaging Data Sheets Cisco 860 Series Integrated Services Routers Cisco 880 Series Integrated Services Routers Cisco 890 Series Integrated Services Routers Cisco 1941 Series Integrated Services Routers Cisco 2900 Series Integrated Services Routers Cisco 3900 Series Integrated Services Routers MIBs Description Link Use Cisco MIB Locator to locate and download MIBs http://www.Software Activation on Cisco Integrated Services Routers and Cisco Integrated Service Routers Generation 2 Additional References Additional References The following sections provide references related to the software activation feature.com/go/mibs for selected platforms.

com user ID and password. Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or its affiliates in the U.cisco.S. and other countries. go to this URL: www. Access to most tools on the Cisco Support website requires a Cisco. http://www. All rights reserved. such as the Product Alert Tool (accessed from Field Notices). To view a list of Cisco trademarks. including documentation and tools for troubleshooting and resolving technical issues with Cisco products and technologies. Software Activation on Cisco Integrated Services Routers and Cisco Integrated Service Routers Generation 2 OL-20697-03 45 .com/go/trademarks. Inc.Software Activation on Cisco Integrated Services Routers and Cisco Integrated Service Routers Generation 2 Additional References Technical Assistance Description Link The Cisco Support website provides extensive online resources. The use of the word partner does not imply a partnership relationship between Cisco and any other company. and Really Simple Syndication (RSS) Feeds.com/techsupport To receive security and technical information about your products. you can subscribe to various services. the Cisco Technical Services Newsletter. Third-party trademarks mentioned are the property of their respective owners.cisco. (1110R) © 2010 Cisco Systems.

Software Activation on Cisco Integrated Services Routers and Cisco Integrated Service Routers Generation 2 Additional References Software Activation on Cisco Integrated Services Routers and Cisco Integrated Service Routers Generation 2 46 OL-20697-03 .

Sign up to vote on this title
UsefulNot useful